Pride Mobility 805KD Owner's Manual page 17

V. OPERATION
Follow these steps to sit in your lift chair (Fig. 5.1):
1. Engage and hold the up/down switch in the UP position to raise your lift chair to the standing position.
2. Back into the lift chair and sit in the centre of the seat, using the armrests for support if needed.
3. Engage and hold the up/down switch in the DOWN position to lower the lift chair to a comfortable seated
position.
Follow these steps to recline your lift chair from the seated position (Fig. 5.1):
1. Engage and hold the up/down switch in the DOWN position until comfortably reclined.
2. Engage and hold the up/down switch in the UP position to return to an upright, seated position. Release
the switch when the lift chair reaches a comfortable seated position.
Follow these steps to stand up from your lift chair (Fig. 5.1):
1. Engage and hold the up/down switch in the UP position to raise your lift chair.
2. Release the switch when the lift chair reaches a height where you can stand up comfortably.
Dual Motor Hand Control Operation (LL660)
Follow these steps to sit in your lift chair (Fig. 5.2):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the UP position
to raise your lift chair from the seated position to the
standing position.
3. Back into the lift chair and sit in the center of the seat,
using the armrests for support if needed.
4. Engage and hold the up/down switch in the DOWN posi-
tion to lower the lift chair to a comfortable seated position.
Follow these steps to recline your lift chair from the
seated position (Fig. 5.2):
1. Slide the inhibit switch to the right.
2. Engage and hold the up/down switch in the DOWN posi-
tion until comfortably reclined.
3. Engage and hold the up/down switch in the UP position
to return to an upright, seated position. Release the
switch when the lift chair reaches a comfortable seated
position.
Follow these steps to raise or lower the footrest while in the seated or reclined position (Fig. 5.2):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the DOWN position until the footrest is fully elevated.
3. Engage and hold the up/down switch in the UP position to lower the footrest.
Follow these steps to stand up from your lift chair from the seated position (Fig. 5.2):
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the UP position to raise your lift chair.
3. Release the switch when the lift chair reaches a height where you can stand up comfortably.
Follow these steps to recline your LL770 Lift Chair to the "Trendelenburg" position from the seated
position (Fig. 5.2):
NOTE: The "Trendelenburg" position is designed to elevate the legs above the head
Lift Chair Series
Figure 5.2 Dual Motor Hand Control (LL660)
www.pridemobility.com
LIFT CHAIR SERIES
DOWN
POSITION
LIFT
POSITION
INHIBIT
SWITCH
UP
POSITION
RECLINE
POSITION
.
17