Table of Contents
Advertisement
AD2
AD2 Handheld Transmitter
Note:
Any change to the encryption status on the receiver (enabling/disabling encryption) requires a sync to send the settings to the transmitter. New encryption keys
for the transmitter and receiver channel are generated on every IR sync, so to request a new key for a transmitter, perform an IR sync with the desired receiver
channel.
Setting the Frequency Manually
The transmitter can be manually tuned to a specific frequency, group, or
channel
1. Navigate to the Radio menu.
2. To manually select a frequency, scroll to G: and C: to edit the group and
channel, or to the frequency parameter .
3. Press enter to enable editing.
4. Use the ∧∨ buttons to adjust the group, channel, or frequency.
5. Press enter to save, and then press exit when finished.
RF Mute
RF Mute prevents transmission of the audio by suppressing the RF signal,
while allowing the transmitter to remain powered-on. The home screen dis-
plays RF Mute in this mode.
RF Output: Mute
Power-on RF Mute
Power-on RF Mute places the transmitter in RF Mute mode immediately
when turned on.
Input Overload
The OVERLOAD message is displayed when the audio input experiences a
high-level input signal. Reduce the input signal or move mic away from the
source to remove the overload.
2017/08/03
IR
RX 1
RF
AUDIO
AD4Q
1
A
B
OL
Axient Digital
SYNC
Wireless Receiver
<15 cm (6 in.)
ULXD4
Digital Wireless Receiver
RADIO
RX 2
RF
AUDIO
RX 3
RF
AUDIO
RX 4
RF
AUDIO
NAVIGATE
2
3
4
A
B
A
B
A
B
OL
OL
OL
SYNC
SYNC
SYNC
Sync Success!
sync
1. From the Radio menu, navigate to RF Output.
2. Choose one of the following options:
⁃
On: RF signal is active
⁃
Mute: RF signal is disabled
3. Press enter to save.
Turning the transmitter off and on, or replacing the battery will restore RF
Output to On.
•
Starting with the transmitter off, press and hold the exit button, and then
switch on the power
•
Continue to hold the exit button until the RF Muted message appears on
the home screen
CONTROL
POWER
PUSH
RADIO
G: 1 C:1
470.700 MHz
RF Power: 10mW
Shure
OVERLOAD
7:45
Shure Incorporated
7/10
Advertisement
Table of Contents
