Product Storage - Navien Comfort-Mate EQM301-QSUS User Manual

Product Storage

If you want to store the product, separate the heating unit and the pad
and follow below steps
How to Maintain and Store the Heating Unit
1. Turn off the heating unit and unplug from the power outlet,
then separate the heating unit and the pad.
- Press the easy connector which is connected to the exit/return water connector
joint on the back of the heating unit to separate.
There is a risk of scalding water inside the heating unit, so remove water when it is cool
enough.
2. Remove the water from inside the heating unit.
Prepare a waterspout to receive the water.
Open the water inlet cover of the heating unit and open the water inlet cap by
turning it counterclockwise.
Hold the cover and lean the heating unit forward to remove the water inside.
In order to remove the residual water in the exit/return water connector joint of
the heating unit, press the protruding part on the middle of the connector to
discharge the remaining water.
3. Su ciently dry the heating unit under a shade and store it
where there is good ventilation and no direct sunlight.
20
1
2