Product Operation - Setting Operation Time - Navien Comfort-Mate EQM301-QSUS User Manual

Product Operation – Setting Timer
The timer can be set for 3 to 12 hours, and it is automatically powered off
after the set time is passed.
Controlling at Heating Unit
Touch the [ ] button and time starts blinking on the R display window.
Set the desired time by touching the -/+ buttons on the R display window.
The time is set after 3 seconds when the desired time is displayed, and the display
window transitions to a temperature display.
The timer is deactivated if the timer button is touched again while the timer mode is
activated.
Controlling with Remote Controller
Touch the [ ] button and time starts blinking
on the R display window.
Set the desired time by touching the -/+ buttons
on the remote control.
When the desired time is displayed, complete the
timer mode by pressing the OK button.
(Even if the OK button is not pressed, the timer
is automatically set after 3 seconds.)
The timer mode is deactivated if the timer button
is pressed again while the timer mode is activated.
17