Modifying The Viewport - Siemens SINUMERIK 828D Operating Manual

Simulating machining
5.8 Changing and adapting a simulation graphic
5.8.4

Modifying the viewport

If you would like to move, enlarge or decrease the size of the segment of the graphical
display, e.g. to view details or display the complete workpiece, use the magnifying glass.
Using the magnifying glass, you can define your own segment and then increase or
decrease its size.
Requirement
The simulation or the simultaneous recording is started.
Procedure
166
1. Press the "Details" softkey.
2. Press the "Magnifying glass" softkey.
A magnifying glass in the shape of a rectangular frame appears.
3. Press the "Magnify +" or <+> softkey to enlarge the frame.
- OR -
Press the "Magnify -" or <-> softkey to reduce the frame.
- OR -
Press a cursor key to move the frame up, down, left or right.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling