Siemens SINUMERIK 828D Operating Manual page 20

Introduction
1.2 Operator panel fronts
Key
20
Function
<NEXT WINDOW>
Continue to next window.
<PAGE UP>
Scrolling upwards in a menu screen.
<PAGE UP> + <SHIFT>
+
Scrolling upwards in a menu screen, the cursor remains at its position.
<PAGE UP> + <CTRL>
+
Scrolling upwards in a menu screen, the cursor jumps into the first line.
<PAGE DOWN>
Scrolling downwards in a menu screen.
<PAGE DOWN> + <SHIFT>
+
Scrolling downwards in a menu screen, the cursor remains at its position.
<PAGE DOWN> + <CTRL>
+
Scrolling downwards in a menu screen, the cursor jumps into the last line.
<Cursor right>
Edit mode:
•
Opens a directory or program (e.g. cycle) in the editor.
Navigation mode:
•
Moves the cursor to the right by one character.
<Cursor right> + <CTRL>
+
Edit mode:
•
Moves the cursor to the right by one word
Navigation mode:
•
Moves the cursor in a table to the next cell to the right.
<Cursor left>
Edit mode:
•
Closes a directory or program (e.g. cycle) in the editor. Changes that
have been made are accepted, functions just like "OK".
Navigation mode:
•
Moves the cursor to the left by one character.
<Cursor left> + <CTRL>
+
Edit mode:
•
Moves the cursor to the right by one word.
Navigation mode:
•
Moves the cursor in a table to the next cell to the right.
<Cursor up>
Edit mode:
•
Moves the cursor upwards.
Navigation mode:
•
–
–
Moves the cursor in a table to the next cell upwards.
Moves the cursor in a menu screen upwards.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling