Member Config - TP-Link T2500-28TC User Manual

Role Change

Individual:
For an individual switch, the following page is displayed.

The following entries are displayed on this screen:
Current Role

Role:
Role Change

Candidate:

16.3.3 Member Config

When this switch is the commander switch of the cluster, via the commander switch you can
manually add a candidate switch to the cluster as well as remove the designated member switch
from the cluster. On this page you can configure and manage the member switch.
Choose the menu Cluster→Cluser→Member Config to load the following page.
The following entries are displayed on this screen:
Create Member

Member MAC:
Select this option to change the role of the switch to be individual
switch.
Figure 16-16 Cluster Configuration for Individual Switch
Displays the role the current switch plays in the cluster.
Select this option to change the role of the switch to be candidate
switch.
Figure 16-17 Member Config
Enter the MAC address of the candidate switch.
288