Member Config - TP-Link T3700G-28TQ User Manual

For an individual switch, the following page is displayed.

The following entries are displayed on this screen:
Current Role

Role:
Cluster management-vlan

VLAN ID:
Role Change

Candidate:

17.3.3 Member Config

When this switch is the commander switch of the cluster, via the commander switch you can
manually add a candidate switch to the cluster as well as remove the designated member switch
from the cluster. On this page you can configure and manage the member switch.
Choose the menu Cluster→Cluser→Member Config to load the following page.
Figure 17-16 Cluster Configuration for Individual Switch
Displays the role the current switch plays in the cluster.
Enter the cluster management-vlan id.
Select this option to change the role of the switch to be candidate
switch.
Figure17-17 Member Config
367