Member Config - TP-Link T3700G-52TQ User Manual
Jetstream 52-port gigabit stackable l3 managed switch
Hide thumbs
Also See for T3700G-52TQ:
- Cli reference manual (493 pages) ,
- Installation manual (37 pages) ,
- User manual (430 pages)
Table of Contents
Advertisement
Status:
Immediate Leave:
9.3.3 Member Config
Use this page to view or configure MVR groups. MVR maintains two types of group entries in its
database, Static and Dynamic. Static entries are configured by the administrator and Dynamic
entries are learned by MVR on the source ports.
Choose the menu Multicast→MVR→Member Config to load the following page.
Displays the port's status.
INACTIVE/InVLAN: The port is part of a VLAN but inactive.
INACTIVE/NotInVLAN: The port is not part of any VLAN and
inactive.
ACTIVE/InVLAN: The port is part of a VLAN and active.
Enable or disable the immediate leave function on this port.
When immediate leave is enabled, the receiver port will be
removed for the multicast group when an IGMP leave message
is received on this port, without sending an IGMP query
message and waiting for the IGMP group membership report.
This function should only be enabled on receiver ports to which
a single receiver device is connected.
Figure9-18 MVR Member Config
153
Advertisement
Table of Contents
