Cold Start - Pfaff 3371-1 series Adjustment Manual

14

Cold start

.29
Switch on the machine.
Select parameter "607" with the corresponding plus/minus keys.
If necessary, enter the code, see Chapter 11.04.01 Entering the access code in the
instruction manual.
With the corresponding plus/minus key carry out the reset operation.
Switch the machine off and on again after approx. 3 seconds.
When a cold start is carried out, the seam patterns 50 – 99 and all altered
parameter settings are deleted! The machine is reset to its condition on
delivery, the machine's zero points remain unaffected.
Adjustment
14 - 28