Auto Pilot - Garmin GIA 63 Installation Manual

4.9.2.2 King Serial DME Interface
Pin Name
KING SERIAL DME CLOCK
KING SERIAL DME DATA
KING SERIAL RNAV REQUEST
KING SERIAL RNAV MODE
MAIN KING SERIAL DME DATA
MAIN KING SERIAL DME CLOCK
MAIN KING SERIAL DME HOLD OUT
MAIN KING SERIAL DME REQUEST
MAIN KING SERIAL DME ON OUT
MAIN KING SERIAL RNAV REQUEST
These pins are used when the GIA 63(W) is configured for King Serial DME tuning.
Input logic levels are:
High 6.5 Vdc or greater
Low 3.5 Vdc or less
4.9.2.3 Automatic Direction Finder Inputs
Pin Name
ADF X/COS
ADF Y/SIN
ADF Z (GROUND)
ADF DC REF IN
ADF (Automatic Direction Finder) inputs which is configurable as either XYZ (AC) or SIN/COS (DC).
Frequency:
Amplitude:
Input Impedance:
Range:
Resolution:
Accuracy:
DC Reference Input:

4.10 Auto Pilot

4.10.1 Radar Altimeter
Pin Name
RADAR ALTIMETER DC HI
RADAR ALTIMETER DC LO
Provides altitude information during approach.
Page 4-24
Revision H
AC
400 Hz ±10%
0 to 11.8 Vrms max
> 80 kΩ
0 to 360 degrees
±0.1 degree or better
±3.0 degrees
--
Connector
P602
P602
P602
P602
P606
P606
P606
P606
P606
P606
Connector
P606
P606
P606
P606
DC
--
-8 V to +8 V
> 80 kΩ
0 to 360 degrees
±0.1 degree or better
±3.0 degrees
0 to 5 Vdc maximum (>40 kΩ)
Connector
P605
P605
GIA 63/GIA 63W Installation Manual
Pin I/O
18 Out
19 Out
20 In
21 In
59 I/O
60 I/O
61 Out
62 I/O
63 Out
64 In
Pin I/O
10 In
11 In
12 --
32 In
Pin I/O
1 In
2 In
190-00303-05