Siemens SIMOCODE pro Manual page 10

Introduction
1.1 Important information
You will need the following manuals in addition to this system manual:
● System manual for SIMOCODE pro, incl. safety and commissioning instructions for
hazardous areas (https://support.industry.siemens.com/cs/ww/en/view/109743957)
● Manual for the PROFIBUS DP Master / PROFINET IO Controller that is used
● SIMATIC Industrial Software Safety Engineering in SIMATIC S7
(http://support.automation.siemens.com/WW/view/en/12490443) This safety manual
provides an overview of
– the fail-safe S7 Distributed Safety and S7 F/H Systems automation systems
– the optimal fail-safe system for implementing a particular automation task
● SIMATIC S7 Industrial Software Distributed Safety - Configuring and Programming
(http://support.automation.siemens.com/WW/view/en/22099875). This manual describes
– How to configure the F-CPU and the F-I/O
– How to program the F-CPU in an F-FBD or an F-LAD
● SIMATIC Industrial Software S7 F/FH Systems - Configuring and Programming
(https://support.industry.siemens.com/cs/ww/en/view/109742100). This manual describes
– How to configure the F-CPU and the F-I/O
– how to program the F-CPU in a CFC
● SIMATIC Industrial Software SIMATIC Safety - Configuring and Programming
(https://support.industry.siemens.com/cs/ww/en/view/54110126)
Reference is made to the above-mentioned operating instructions and manuals at the
appropriate points in this system manual.
Further information about SIMOCODE pro can be found on the Internet at:
● SIMOCODE pro (https://www.siemens.com/simocode)
● Information and Download Center (https://www.siemens.com/sirius/infomaterial)
● Siemens Industry Online Support (SIOS) (https://www.siemens.com/sirius/support)
● ATEX (www.siemens.com/sirius/atex)
● Certificates (https://www.siemens.com/sirius/approvals)
Additional support (service and support)
Technical Assistance:
Phone: +49 (0) 911-895-5900 (8 a.m. to 5 p.m. CET)
Fax: +49 (0) 911-895-5907
Email: technical-assistance@siemens.com
Internet: Support Request (https://www.siemens.com/sirius/technical-assistance)
10
SIMOCODE pro - Fail-Safe Digital Modules
Manual, 11/2017, NEB631679702000/RS-AA/002