Bluetooth wireless headset for mobile phones (68 pages)
Summary of Contents for BlueTrek BT01
Page 1
Bluetrek® Bluetooth™ Wireless Headset for mobile phones User Guide...
Page 2
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3
Bluetrek can be used with: A qualified BlueTooth Mobile Phone; A non-Bluetooth mobile Phone when used with the BT07 adaptor (optional). To check the list of qualified Bluetooth Mobile Phones working with Bluetrek®, please consult: www.bluetrek.com Your package includes: Bluetrek®...
Page 4
3. Charging BlueTrek® Your Headset is delivered uncharged. So before you start to use Bluetrek®, you must fully recharge it for about 2 hours. It is mandatory to use the charger provided with your product. The use of any other charger will automatically suspend the warranty.
Page 5
9. Press again the “Yes” key to confirm the option 1: “Add to paired” 10. Type your passkey: 0000 (four zeros) and then press “Yes” 11. The pairing is then in process and you should read under the title Nametag: BlueTrek 1. 12. Press “Yes” to confirm again.
5. Wearing the headset Please refer to Figure 2. FIGURE 2 The headset can be used in both ears. Hold the headset with the opposite hand while holding your ear with the other hand. For instance, if you want to place the headset on your left ear, hold the headset with your right hand while...
Position the headset properly on your ear and then release the speaker. Finally, make sure that the speaker fits well into your ear. At this stage it should be stable and comfortable. Your headset is now ready. 6. Switching the Headset ON and OFF: 6.a.
9. Ending a Call To end a call from the BlueTrek headset, press on any button of the Headset until you hear a short tone. The headset returns to standby mode, and the light flashes slowly in green (or red if battery is low).
A ring tone is audible at the BlueTrek® headset To answer the call presses shortly any button on the BlueTrek® Headset for about 1 second until you hear a tone. The light will flash green slowly (or red if battery is low) on the BlueTrek®...
Page 10
Do not let children play with your Headset, since it contains small parts that could become detached and create a choking hazard. Check the regulation in you area if you plan to use your Headset while driving. Turn off your Headset before boarding an airplane.