TomTom GO Manual page 14

Ravenna-UG.book Page 15 Wednesday, August 20, 2008 1:26 PM
2. When you hear a beep, say, "Navigate to
Home."
When you speak, the voice control monitor
shows if you are talking too loudly or
quietly:
A green bar means your
voice is at the right level for
your GO to hear your
commands.
A red bar means your voice
is too loud.
A grey bar means your
voice is too quiet.
For some phrases, your GO will always
repeat the command and then ask you if
the command has been correctly
recognized.
3. If the command is correct, say, "Yes."
If the command is incorrect, say, "No" and
when prompted, say the command again
after the beep .
Your GO plans a route from your current
position to your Home address.
Voice control
Tips
• Voice control switches off after a few
seconds if you don't say anything. For
example, if your GO asks you to confirm
the last command you gave and you don't
say anything, voice control switches off
after a few seconds.
• You can stop your GO from listening for
commands either by tapping the screen or
by saying any of the following commands:
Back, Cancel, Quit.
• To select an item from a list, tap the screen
to select the item. Voice control cannot be
used to select items from a list.
15
EN