3.
Tap
or
, and then select the preset you want to delete.
4.
Tap "Edit".
5.
Tap "Remove from Favourites/Favorites", and then tap "OK".
Editing a Preset's Name
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Preset".
3.
Tap
or
, and then select the preset to edit its name.
4.
Tap "Edit".
5.
Tap "Edit Preset Name".
6.
Enter the name, and then tap "OK".
Note
•
In step 3, you can jump directly to a specific page by tapping "Page Jump" and entering the page
number.
•
You can edit the name of a preset registered as a favorite by tapping "Favourites/Favorites" after step
2.
•
To reset a preset's name:
1.
Select the preset name.
2.
Tap "Edit".
3.
Tap "Delete Preset Name", and then tap "OK".
3.10.5 Adjusting the Brightness of the Picture
You can adjust the brightness of the Network Camera.
Note
•
Depending on the Network Camera, this feature may not be available.
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Camera Settings".
3.
Tap "Brightness".
4.
Do one of the following.
a.
To adjust brighter, tap " ".
b.
To adjust darker, tap " ".
c.
To set to the default brightness, tap "Reset".
d.
To exit, tap "OK".
Note
•
The range of brightness and default value depend on the Network Camera.
Document Version: 2017-08
.
.
3.10.5 Adjusting the Brightness of the Picture
Operating Instructions
85