3.10.4 Network Camera Presets
Making a call
1.
In standby mode, dial the Linked Number.
2.
Tap "Voice Call".
The video feed of the Network Camera associated with the Linked Number is displayed.
Receiving a call
1.
While receiving a call, tap "Voice Call".
If the call received was made using a Linked Number, the video feed of the associated Network Camera
is displayed.
3.10.4 Network Camera Presets
You can select a viewing position that has been registered in the Network Camera's settings beforehand.
These registered viewing positions are called "presets".
Note
•
Depending on the Network Camera, this feature may not be available.
Adding a Preset
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Preset".
3.
Tap
or
, and then select the desired item.
4.
Tap "OK".
Displays the selected position image.
5.
To return to the preset selection screen, tap
To return to the operation screen, tap "OK".
Note
•
Tapping
in step 3 displays the camera's position before a preset was selected.
Adding a Preset to Your Favorites
You can register a preset to your favorites.
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Preset".
3.
Tap
or
, and then select the preset you want to register.
4.
Tap "Edit".
5.
Tap "Add to Favourites/Favorites", and then tap "OK".
Deleting a Preset from Your Favorites
[While displaying a video feed from a Network Camera (operation screen)]
1.
Press /
MENU
2.
Tap "Preset".
84
Operating Instructions
.
.
.
.
Document Version: 2017-08