2.2.2 Adjusting the Stand Position
Push the PUSH marks in the direction indicated, with both hands, and tilt and slide the stand until it
becomes fixed in the desired position.
•
Lowering the stand
PUSH
2.2.3 Removing the Stand
Tilt the stand in the direction indicated while pushing the PUSH marks with both hands.
PUSH
2.2.4 Adjusting the Camera Angle (KX-HDV430 only)
You can tilt the camera's angle by turning the wheel on the back of the camera.
↑ : Tilt the camera upward.
↓ : Tilt the camera downward.
Note
If the camera is not being used, the lens can be hidden by turning the wheel to the top.
Document Version: 2017-08
•
PUSH
PUSH
2.2.2 Adjusting the Stand Position
Raising the stand
PUSH
PUSH
Operating Instructions
19