HP SimpliVity OmniCube CN-3400 Installation And Maintenance Manual page 37

You have completed these tasks:
• Migrated all virtual machines (VM) off of the OmniCube host.
• Displayed the PERC BIOS Configuration Utlity on the computer connected to the OmniCube host. See
Access the PERC BIOS Configuration Utility on page 32.
Procedure overview
The PERC H730P Mini RAID controller in an OmniCube CN-2400-E or a CN-5400-E system contains two
disk groups: The RAID1 (CN-2400-E) or RAID5 (CN-5400-E) disk group is on the SSD drives, which are
reserved for SimpliVity, and the RAID6 (CN-2400-E) or RAID60 (CN-5400-E) disk group is on the HDD
drives, which store user data.
You delete a disk group to delete all of its virtual disks. You can also delete individual viritual disks from a
disk group.
Caution:
When you delete a disk group all data on the underlying physical disks is lost.
Procedure
1. Use the arrow keys to select the PERC H730P Mini controller.
2. Select the PERC H730P Mini controller on the Virtual Disk Management screen.
3. Select one of the disk groups.
4. Press F2 and select Delete Disk Group.
Delete disk groups 37