Table of Contents
Advertisement
Figure 2: Back panel of an OmniCube server with a single CPU
Figure 3: Back panel of an OmniCube server with two CPUs
Table 4: Back panel component descriptions
Callout
1
2
3
12
Hardware components
Component
Riser 1
Accelerator
RAID controller
Description
Contains PCIe slots 1-3. You can install optional
2x10GbE or 2x1GbE network cards in these slots, as
shown in slot 2, used by guest VMs only.
A system with a single CPU does not contain riser 1. A
plate is installed in place of riser 1.
Installed in PCIe slot 5 of riser 2, but also occupies
slot 4. The card has two LEDs that continuously glow
green to indicate normal operation.
RAID Controller for the rear boot drives installed in
PCIe slot 6 of riser 3. The RAID Controller for the front
data disks is a mezzanine card.
Hide quick links:
Advertisement
Table of Contents
