Recording Your Performance - Yamaha EAD10 Owner's Manual

Recording Your Performance

Use the EAD10 to record your performance. When a USB flash drive is connected to the unit, audio is recorded to the USB
flash drive.
 Recording to the Main Unit (when no USB flash drive is connected
to the terminal)
1.
Press the [RECORDER] button.
Destination and elapsed playback time
(min: sec)
Recording
2.
Press the button

below " " ([F1]) to
start recording.
While recording "Now recording
.. (elapsed recording time
(min:sec))" appears.
3.
Play the drums.
4.
After you finish play-
ing, press the button
below " " ([F1]) to
stop recording.
The [RECORDER] button lights while
recording or during playback.
The RECORDER screen opens.
Playing Back
NOTE
This is not displayed when there is
no recorded song.
2.
Press the ">" button
([F2]) to start play-
back.
3.
To stop playback,

press the " " button
([F2]).
Basic Guide
Recording Your Performance
Press the [EXIT] button
to return to the Scene
screen.
Switching to AUX IN
Recording
Change the setting when recording
audio from the [AUX IN] jack.
For more information, see "Switching
to AUX IN Recording" on page 43.
NOTICE
• When your performance is already
recorded on the Main Unit, recording
again on the Main Unit erases the
previous recording.
• Any performance recorded to the
EAD10 Main Unit will be lost when the
power is turned off. Please export any
recorded performance data that you
wish to save.
NOTE
• Recording time to the Main Unit is about
1 minute 30 seconds.
• Press the [MENU] button to open the
Job screen from which you can export
your recording as a audio file. For more
information, refer to the Reference Man-
ual (Advanced) (PDF). (MENU/Job/
Recorder/Export Audio)
EAD10 Owner's Manual 41