Physical Connection Settings; Setting Ethernet Speed; Usb Port Security - Xerox ColorQube 8580 System Administrator Manual

Initial Setup

Physical Connection Settings

You can specify Ethernet and USB settings, such as Ethernet Rated Speed, USB Connection Mode, and
Print Timeout for USB printing.

Setting Ethernet Speed

You can select the Ethernet connection speed for your network. You can select speed settings based on
full duplex or half duplex modes.
• Full Duplex speed: The connection sends and receives data simultaneously.
Half Duplex speed: The connection sends data in one direction at a time only.
•
To set the ethernet speed:
In CentreWare Internet Services, click Properties > Interfaces.
1.
2. For Speed, select an option.
3. Click Save Changes.

USB Port Security

You can prevent unauthorized access to the printer through USB ports by disabling the ports.
Disabling the USB Port from CentreWare Internet Services
In CentreWare Internet Services, click Properties > Interfaces.
1.
2. For USB Port, to disable, select Off.
Click Save Changes.
3.
Disabling the USB Port at the Printer Control Panel
1. At the printer control panel, use the arrows to navigate to Printer Setup, then press OK.
2. Navigate to Connection Setup, then press OK.
Navigate to USB Setup, then press OK.
3.
4. To disable, for USB Port, press OK.
®
18 Xerox ColorQube 8580/8880 Color Printer
System Administrator Guide