Cloning Printer Settings - Xerox ColorQube 8580 System Administrator Manual

Hide thumbs Also See for ColorQube 8580:

Table of Contents

Administrator Tools

Cloning Printer Settings

Cloning allows you to save your current printer settings to a file to use as a backup and restore file for

your printer. You can also use a clone file to copy your printer settings to other printers.

Note:

To ensure that EtherTalk Zone or IP Domain Name settings are cloned, select EtherTalk or

TCP/IP settings for the source printer.

Before you begin:

•

If you are using a clone file to copy your printer settings to another printer, ensure that both printers

are the same model and have the same version of software installed.

•

Ensure that the source printer and the destination printer have an IP address, network mask, and

default gateway.

To clone the printer settings:

In CentreWare Internet Services, click Properties.

Click Clone Printer.

To specify the parameters that you want to clone from the source printer, select check boxes, or click

Check All.

To specify the Destination Printer, type the IP address or DNS name.

For Optional Settings, type the name of the destination printer.

For EtherTalk Zone or IP Domain Name, if the destination printer is in a different location, type the

modifications as needed.

Click Clone Selected Settings.

Click Clone.

Xerox

ColorQube 8580/8880 Color Printer

System Administrator Guide

Table of Contents

Colorqube 8880