Xerox ColorQube 8580 System Administrator Manual page 92

Printer Commands
PJL Command
@PJL XPERSONALJOB
@PJL XPROOFJOB
@PJL XSAVEDJOB
@PJL XSECUREJOB
@PJL XIGNOREFF=value
@PJL XLINETERMINATION=value
@PJL XMBFSIZE=value
@PJL XMEDIASOURCE=value
@PJL XMEDIATYPE=value
@PJL XPCLTRAYSWITCH=value
®
92 Xerox ColorQube 8580/8880 Color Printer
System Administrator Guide
Values
There is no
corresponding value.
There is no
corresponding value.
There is no
corresponding value.
There is no
corresponding value.
ON, OFF
ON, OFF
Values can include ANY,
LETTER, STATEMENT,
EXECUTIVE, or other
supported paper type
names. The terms are
case-sensitive.
Values can include ANY
or TRAYn, where n is the
number of the tray.
Values can include ANY,
PAPER, LABEL, or other
supported media type
names. The terms are
case-sensitive.
ON, OFF
Description
Starts a Personal Print job.
Starts a Proof Print job.
Starts a Saved Print job.
Starts a Secure Print job.
Ignores FormFeed commands when
printing PCL blank pages.
Terminates a line.
Sets the paper size for Tray 1.
Sets the media source.
Sets the paper type.
This command switches trays when a tray
becomes empty. If AutoSelect is chosen as
the tray in PCL, then tray switching is
always active, regardless of the value.
When the current tray becomes empty, the
printer attempts to switch to another tray
with the same size and type of paper. This
command only takes effect when a specific
tray, such as Tray 2, is selected in the job.
When this command is ON, tray switching
still occurs when the tray becomes empty.
When this command is OFF, no switching
occurs and the user is prompted to load
paper.