Table of Contents
Advertisement
OSD description
• HDBaseT/IR
Press ENTER / ► to enter the HDBaseT/IR menu.
• HDBaseT– IR/RS232/RJ45
Press ◄► to enter and enable or disable HDBaseT–IR/RS232/RJ45 Control.
• Front IR
Press ◄► to enter and enable or disable Front IR.
• Rear IR
Press ◄► to enter and enable or disable Rear IR.
Note: Enable HDBaseT– IR/RS232/RJ45 control function when you desire to use HDBaseT TX
box. (Remove RS232 and RJ45/LAN control function from Projector to HDBaseT TX box.)
See HDBaseT– IR/RS232/RJ45 control function table.
Note: When HDBaseT– IR/RS232/RJ45 enable, Low Power Mode will auto set to HDBaseT.
Note: HDBaseT– IR/RS232/RJ45 control is disabled when the HDBaseT TX box signal is cutoff.
HDBaseT– IR/RS232/RJ45 control function table
Control
Function
Side
Front-IR (wireless)
Rear-IR (wireless)
Projector
RS-232
RJ45/LAN
HDBT-IR (wireless)
RS-232
RJ45/LAN
HDBaseT
TX Box
Wired remote
O: Enable X: Disable
Advanced 2
Press ENTER / ► to enter the Advanced 2 menu.
• Sleep Timer
Press ◄► to enter and set sleep timer. The projector automatically turns off after the preset period
of time.
• Source Filter
Press ENTER / ► to enter the Source Filter menu.
Press ◄► to enter and enable or disable the desire source.
Custom Light
In Custom Light mode press ◄► to enter and adjust the brightness of the projectors to similarity.
Note: When Laser Mode set to Custom Light, Custom Light function Enable.
English-70
Projector Mode
Low Power Mode
Low Power Mode
On (<0.5W)
On by Lan (<3W)
O
O
O
X
X
X
X
X
HDBaseT control
Enable Low Power
Mode On by
HDBaseT (<6W)
O (Can disable by
O
OSD)
O (Can disable by
O
OSD)
O
X
O
X
X
O
X
O
X
O
X
O
Remark
User can connect wired
remote at HDBaseT TX
side to get the wired
function.
Advertisement
Table of Contents
