Table of Contents
Advertisement
use a "push stick" or "auxiliary handle" (neither included) only when ripping
33.
widths under 2". use a "push block" and "auxiliary fence" (neither included)
when ripping widths of 2" to 6".
34.
Keep the table of the table saw clean and clear of debris. Remove cut-off pieces
and scraps of wood from the Table before starting the Table Saw.
35.
use the right tool for the job. Do not attempt to force small equipment to do the
work of larger industrial equipment. There are certain applications for which this
Table Saw was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this Table Saw, and do not use this Table Saw
for a purpose for which it was not intended.
warning! Some dust created by power sanding, sawing, grinding, drilling, and
36.
other construction activities, contain chemicals known (to the State of California) to
cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are: lead from lead-based paints, crystalline silica from bricks and ce-
ment or other masonry products, arsenic and chromium from chemically treated
lumber. Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles. (California Health & Safety
Code 25249.5, et seq.)
warning! People with pacemakers should consult their physician(s) before using
37.
this product. Operation of electrical equipment in close proximity to a heart pace-
maker could cause interference or failure of the pacemaker.
warning! The warnings and cautions discussed in this manual cannot cover all
38.
possible conditions and situations that may occur. It must be understood by the
operator that common sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.
for technical questions, please call 1-800-444-3353.
SKU 95112
saVe tHese instructions
Page 9
Advertisement
Table of Contents
