Display Board Board & Control Board; Power Board & Transformer - EdgeStar AFR151SS Service Manual

3. DISASSEMBLY
3-8 DISPLAY BOARD & CONTROL BOARD
(Models：AFR151SSOD, AFR151SS, ABR151SG,
AWC151SZ, , ABR241SG, AWC241SZ, AFR241SS,
AFR241SSOD, AWC241TSZ, AWC241FD)
1. Loosen four screws.
2. Pull out the electrical box.
3.
Unplug all cable connectors. (figure 14)
4. Loosen four screws. (figure 15)
5. The control board is pictured below. (figure 16)
screw
Figure 14
screw
Figure 15
Figure 16
- 15 -
6. Remove the display cover. Pull out the display board support
and find out the display board inside it. (figure 17)
7. The display board is like below. (figure 18)
3-9 POWER BOARD & TRANSFORMER
(Models： ABR241SG, AWC241SZ, AFR241SS,
AFR241SSOD, AWC241TSZ, AWC241FD)
1. Loosen three screws. (figure 19)
2. The power board & transformer are like below. (figure 20)
Figure 17
Figure 18
Figure 19
Figure 20