Sensor & Fan - EdgeStar AFR151SS Service Manual

3. DISASSEMBLY
(Models：AFR151SSOD, AFR151SS, ABR151SG,
AWC151SZ
1． Loosen three screws. (figure 21)
2. The power board & transformer are like below. (figure 22)
3-10 SENSOR & FAN
(Models：AFR151SSOD, AFR151SS,)
1. Remove the screws on both sides of air duct board.. Pull
out the air duct board cover. (figure 23)
Remove the cover
screws
1.1 Loosen six screws. Pull out the rear air duct cover.
Figure 21
Figure 22
2.
wire housing
screw
Carbon Filter
fan
Screw
defrost
Sensor
sensor
Figure 23
- 16 -
(Models：,ABR151SG, AWC151SZ)
(figure 24)
Loosen 1 screw. You can replace the sensor & fan.
(figure 25)
evaporator
Carbon Filter
fan
Screw
Sensor
Figure 24
Figure 43
Figure 25