Replacing The System Board And I/O Bracket - Lenovo V510z User Manual And Hardware Maintenance Manual

Replacing the system board and I/O bracket

Attention
1
Remove the computer stand. For details, see
Stand.
2
Remove the computer cover. For details, see
3
Remove the optical drive. For details, see
4
Remove the memory module. For details, see
5
Remove the VESA mount bracket. For details, see
6
Remove the middle frame. For details, see
7
Remove the system board shield. For details, see
8
Remove the heat sink. For details, see
9
Remove the M.2 storage drive. For details, see
10
Remove the Wi-Fi card. For details, see
11
Remove the microprocessor. For details, see
12
Make a record of the cable routing and cable connections, and then disconnect all cables from the
system board. For details, see
13
Replace the system board and I/O bracket.
Note
Replacing FRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Replacing the heat sink.
System board.
Carefully handle the system board by its edges.
Replacing the monitor stand
Removing the computer cover.
Replacing the optical drive.
Replacing the memory module.
Replacing the VESA mount bracket.
Replacing the middle frame.
Replacing the system board shield.
Replacing the M.2 storage drive.
Replacing the Wi-Fi card.
Replacing the microprocessor.
or
Replacing the UltraFlex II
59