Honeywell Galaxy Dimension series Integration Manual page 45

Event logged
SIA event on panel
HA-Holdup PA SILENT
Alarm
PA UNSET
DURESS
OMITTED
HB-Holdup
Bypass
HR-Hold Restoral PA SILENT
PA UNSET
LB-Program begin ENGINEER
LR-Line Restore LINE FAIL
LT-Line Trouble LINE FAIL
LINE FAIL
KSW UNSET
OG-Open Area
UNSET
OP-Open Report KSW UNSET
UNSET
UNSET
OR-Disarm alarm LF RESET
PA RESET
PA RESET
PF RESET
SYS RESET
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Event description
logged on panel
PA Silent zone alarm
PA Unset zone alarm
Duress with code
Holdup zone omitted
PA Silent zone restored
PA Unset zone restored
Engineer mode entered
Zone Tel line fail rest
Mod Tel line fail trouble
Zone Tel line fail trouble
Keyswitch part unset
Part Unset
Keyswitch unset
Automatic unset
Unset
Line Fail reset
All PA alarms reset
Ksw reset PA alarms
Power Failure reset
All Burglar alarms reset
Custom event in Security Center
HA-Holdup Alarm, +PA SILENT-PA Silent zone
alarm
HA-Holdup Alarm, +PA UNSET-PA Unset zone
alarm
HA-Holdup Alarm, DURESS-Duress with code
HB-Holdup Bypass, OMITTED-Holdup zone
omitted
HR-Hold Restoral, -PA SILENT-PA Silent zone
restored
HR-Hold Restoral, -PA UNSET-PA Unset zone
restored
LB-Program begin, +ENGINEER-Engineer mode
entered
LR-Line Restore, -LINE FAIL-Zone Tel line fail
rest
LT-Line Trouble, +LINE FAIL-Mod Tel line fail
trouble
LT-Line Trouble, +LINE FAIL-Zone Tel line fail
trouble
OG-Open Area, KSW UNSET-Keyswitch part
unset
OG-Open Area, UNSET-Part Unset
OP-Open Report, KSW UNSET-Keyswitch unset
OP-Open Report, UNSET-Automatic unset
OP-Open Report, UNSET-Unset
OR-Disarm alarm, LF RESET-Line Fail reset
OR-Disarm alarm, PA RESET-All PA alarms reset
OR-Disarm alarm, PA RESET-Ksw reset PA
alarms
OR-Disarm alarm, PF RESET-Power Failure reset
OR-Disarm alarm, SYS RESET-All Burglar alarms
reset
40