Chrysler 300 2016 User Manual page 142

W H A T T O D O I N E M E R G E N C I E S
4. Place the jack underneath the lift area that is closest to the flat tire. Turn the jack screw
clockwise to firmly engage the jack saddle with the lift area of the sill flange.
NOTE:
If the vehicle is too low for jack placement, slide the jack on its side and rotate it up into posi-
tion.
5. Raise the vehicle just enough to remove the
flat tire and install the spare tire.
Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the
jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
140
WARNING!
Front Jacking Location
Rear Jacking Location