Chrysler 300 2016 User Manual page 136

W H A T T O D O I N E M E R G E N C I E S
– Electronic Stability Control (ESC) OFF Indicator Light
The ESC Off mode is intended for off-highway or off-road use only and should not be used on
any public roadways. In this mode, all TCS and ESC stability features are turned OFF. To enter
the "Full Off" mode, push and hold the "ESC" switch for five seconds while the vehicle is stopped
with the engine running. After five seconds, a chime will sound, the "ESC OFF" Indicator Light"
will illuminate, and the "ESC OFF" message will display in the vehicle cluster (left of the
odometer). The "ESC OFF" message may appear in the Driver Information Display (DID). To
turn ESC ON again, momentarily press the "ESC" switch.
– Door Open Indicator
This indicator will illuminate when a door(s) is left open and not fully closed.
– Sport Shifting
This light will illuminate when SPORT MODE is selected. Sport Mode will provide improved
throttle response and modified shifting for an enhanced driving experience as well as the greatest
amount of steering feel. (SPORT MODE will enable AWD (if equipped) in the AWD Sport
mode providing an enhanced AWD driving performance).
Oil Change Due
Your vehicle is equipped with an engine oil change indicator system. The "Oil Change Due"
message will display for 5 seconds along with a single chime to indicate the next scheduled oil
change interval. The engine oil change indicator system is duty cycle based, which means the
engine oil change interval may fluctuate dependent upon your personal driving style.
Resetting The Light After Servicing
Vehicles Equipped With Keyless Enter-N-Go
1. Without pushing the brake pedal, push the ENGINE START/STOP button and cycle the
ignition to the ON/RUN position (do not start the engine).
2. Fully push the accelerator pedal, slowly, three times within 10 seconds.
3. Without pushing the brake pedal, push the ENGINE START/STOP button once to return the
ignition to the OFF/LOCK position.
Vehicles Not Equipped With Keyless Enter-N-Go
1. Turn the ignition switch to the ON/RUN position (do not start the engine).
2. Fully push the accelerator pedal, slowly, three times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
NOTE:
• If the indicator message illuminates when you start the vehicle, the oil change indicator system
did not reset. If necessary, repeat this procedure.
• Resetting the oil life can also be done within the "Oil Life" menu under "Vehicle Info."
134