BenQ MX731 User Manual page 39

System
Language Sets the language for the On-Screen Display (OSD) menus.
• Network: Allows you to make following settings:
Standby
Settings
• Monitor Out: Allows the projector to output a VGA signal when it is in standby
• Audio Pass Through: The projector can play sound when it is in standby mode
•
Background
• Splash
Settings
• Menu Type: Switches to the Basic OSD menu.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
Audio
Settings
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Returns all settings to the factory preset values.
Factory
Default
The following settings will still remain: 2D Keystone, Auto Vertical Keystone, Corner Fit,
Wireless LAN, Wired LAN, Projector Installation, Lamp Timer, High Altitude Mode,
Security Settings, Baud Rate.
Returns all of the adjustments you've made for the System menu to the factory
Reset System
preset values.
Enable Network
Standby Mode
Switch to Normal
Standby Mode
mode and the PC 1 jack and the MONITOR OUT jack are correctly connected
to devices.
and the corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
make the connection.
Background: Sets the background color for the projector.
Screen: Allows you to select which logo screen will be displayed during
projector start-up.
your last key press.
in startup and shutdown process.
Allows the projector to provide the network function in
standby mode when Monitor Out or Audio Pass
Through is activated.
Allows the projector to disable the network function
after a set period of time after it enters standby mode.
For instance, if 20 min is selected, the projector is able to
provide the network function for 20 minutes after it
enters standby mode. When 20 minutes is up, the
projector enters normal standby mode.
Connection on page 19
Menu operation
/ to
for how to
39