Test Pattern - BenQ MX731 User Manual

Display
There are several options to set the image's aspect ratio depending on your input
signal source.
• Auto: Scales an image
• Real: Projects an image as its
Aspect Ratio
• 4:3: Scales an image so that it is
• 16:9: Scales an image so that it is
• 16:10: Scales an image so that it is
2D Keystone
See
Auto Vertical
Keystone
Corner Fit See
Adjusts the image size and focus and check that the
projected image is free from distortion.

Test Pattern

•
PC &
Component
YPbPr Tuning
• H. Size: Adjusts the horizontal width of the image.
Displays the position adjustment page. To move the projected image, use the
Position directional arrow keys. This function is only available when a PC signal (analog RGB)
is selected.
34 Menu operation
proportionally to fit the
projector's native resolution in its
horizontal or vertical width.
original resolution and resizes it to
fit within the display area. For
input signals with lower
resolutions, the projected image
will be displayed in its original size.
displayed in the center of the
screen with a 4:3 aspect ratio.
displayed in the center of the
screen with a 16:9 aspect ratio.
displayed in the center of the
screen with a 16:10 aspect ratio.
Correcting keystone on page
Adjusting Corner Fit on page
Phase: Adjusts the clock phase to reduce image
distortion. This function is only available when a PC
signal (analog RGB) or YPbPr signal is selected.
This function is only available when a PC signal (analog RGB) is selected.
(MX731)
16:9 picture
4:3 picture
16:9 picture
4:3 picture
16:9 picture
16:10 picture
17.
18.
(MW732) (MH733)