Wiring - Electro-Voice EVID-S5.2XB Installation Manual

Using a threaded rod
The U-Bracket can be installed to a threaded rod.
Figure 3.4: Threaded rod
Using a pole mount
The U-Bracket can be installed to a pole mount using steel band clamps.
Figure 3.5: Pole mount
Using a junction box
The U-Bracket can be installed to a junction box using a 0.25" rubber grommet (not included)
for wiring.
Figure 3.6: Junction box
See also
•
3.3

Wiring

Wiring the speaker
The speaker can be wired using either 2-wires, for input only, or 4-wires, for input and parallel
output. Reference the polarity markers on the Euroblock.
To wire the speaker using the weather cover, do the following:
Electro-Voice
Installing the speaker, page 7
Installation manual
en 9
2017.08 | 01 | F.01U.345.358