PAPER TYPE REGISTRATION
Store a paper type when the desired paper type does not appear as a selection or when you wish to create a new set of
paper properties.
Up to 10 paper types can be stored.
Item
Type Name
Fixed Paper Side
Disable Duplex
Disable Reverse
Disable Staple
Disable Punch
Disable Fold
The settings that can be selected vary depending on the peripheral devices installed.
AUTO TRAY SWITCHING
When a tray runs out of paper during printing, this determines whether or not another tray with the same size and type of
paper is automatically selected and printing continues.
USB-DEVICE CHECK
This lets you check the connection when a USB device is connected to the machine. Touch the [USB-Device Check] key
to use this function.
The status of a USB device that is not compatible with the machine will not appear.
Store any name.
The factory default names are "User Type 1" - "User Type 10".
Enable this setting when paper with a front and reverse side is used.
Enable this setting when paper is loaded that cannot used for two-sided printing.
Enable this setting when you are using paper that cannot be turned over.
Enable this setting when paper is used that cannot be stapled.
Enable this setting when paper is used that cannot be punched.
Enable this setting when you are using paper that cannot be folded.
84
Description