Table of Contents
Advertisement
NOTE: When an MP3 or WMA disc is inserted into the CD player, it will display CD READING until the first
track is played. When a USB stick or an iPod is connected into the USB connector, it will display USB
READING or iPod READING until the first track is played. The file type and elapsed time will appear
next. Then the track/file number, artist, song, album & folder/playlist name will appear on the second
row display. The access time to begin playing CD, USB or iPod will vary depending on the content the
media has.
If folder
or folder
it will begin showing the track/file number, artist, song, album & folder/playlist name on the second
row display before returning to the default display.
If RPT is pressed once, REPEAT TRACK will appear and the RPT icon will turn on. Then the display
returns to its default, current track playing. In iPod mode, only the RPT icon will turn on
If RPT is pressed a second time, REPEAT FOLDER/PLST will appear and the RPT icon will remain
turned on. Then the display returns to its default.
If RPT is pressed a third time, REPEAT OFF will appear and the RPT icon will turn off. Then the
display returns to its default.
If RDM is pressed once, RANDOM FOLDER/PLST will appear and the RDM icon will turn on. Then
the display returns to its default. In iPod mode, only the RDM icon will turn on
If RDM is pressed a second time, RANDOM ALL will appear and the RDM icon will remain turned on.
Then the display returns to its default.
If RDM is pressed a third time, RANDOM OFF will appear and the RDM icon will turn off. Then the
display returns to its default. In iPod mode, only the RDM icon will turn off.
If the Preset 2/PAUSE/PLAY button is pressed, the Radio will display PAUSE (if RPT or RDM are
currently selected the icon will remain on). If pressed again, it will go back to the previous display and
continue playing the CD/USB/iPod.
When a USB stick is connected and DEVICE NOT SUPPORTED appears on the display this means
that the USB used does not meet the requirements. Please use a different USB stick. Please see
TROUBLESHOOTING section.
AUX Input Displays
When you are using an external device connected through the auxiliary inputs, pressing the "i Title/Menu"
button will have no effect.
When a device is connected via the aux input, the Radio will display FRONT AUX as long as it is kept in this
mode. If AUX is selected by pressing the SRC button and no device is connected, the Radio will select the
rear auxiliary input, and display REAR AUX as long as is kept in this mode.
Hands Free Displays (Bluetooth
When a cell phone has been previously paired and connected (see Using the Bluetooth
section) with the Radio and an incoming call is received, the Radio will pause/mute and the display will show
the phone name on the first line and the phone number on the second line. The << characters indicate an
incoming call. Note: If the phone is in normal mode the Radio will emit a ring tone. If the phone is in silent
mode, there will not be a ring tone.
When a cell phone has been previously paired and connected (see Using the Bluetooth
section) with the Radio and a call is placed from Radio or the cell phone, the Radio will pause/mute and the
display will show the phone name on the first line and the phone number on the second line. The >>
characters indicate an outgoing call.
Phone Disconnection
If the cell phone ends the Bluetooth
the Radio will display terminate the connection and the Radio will display PHONE
DISCONNECTED for 3 seconds
are pressed, the Radio will display the folder and track number, and then
®
)
®
connection, the phone turns off or the phone signal weakens,
®
Hands Free
®
Hands Free
7
Advertisement
Table of Contents
