Button Functions; Troubleshooting - Delphi 28315188 Amber Display Owner's Manual

Commercial vehicle systems radio ready receiver with bluetooth cd/mp3/usb/ipod/aux/bluetooth/receiver
Table of Contents

Advertisement

the iPod last selected mode. After playing the last track of the iPod last selected mode, play stops and the
Radio will display the iPod Menu.

Button Functions

SEEK
: Press
for less than 2 seconds to forward to the next track. Press and hold the same button to
fast forward. When you release the button, the track will continue to play.
SEEK
: Press
for less than 2 seconds to go to the beginning of the current track, if pressed within the
first 10 seconds of the track, the Radio goes to the previous track. Press the button again within the first
second to go to the beginning of previous track. Press and hold the same button to fast reverse. When you
release the button, the track will continue to play.
1/ESC: Press the ESC button to exit or go back to previous menu when in a menu.
2/PAUSE/PLAY: Press the PAUSE/PLAY button to pause a track. PAUSE will be displayed and the audio
will be muted. Press PAUSE/PLAY again to resume playing the track.
3/BRWSE: Press the BRWSE button to enter to the iPod menu. In the iPod menu you will be able to scroll
and select with the
/AUDIO knob. Turn to the right to increase, left to decrease and press knob to confirm
selection (only on iPod menu).
4/RPT: Press the RPT button once to repeat the current track. RPT icon & REPEAT ONE TRACK will
appear on the display. The same file will continue to play until the RPT button is pressed again. If RPT is
pressed a second time REPEAT ALL TRACKS will appear on the display and the RPT icon will remain
turned on. The same folder/playlist (iPod last selected mode) will continue to play until the RPT button is
pressed again. If RPT is pressed a third time, REPEAT OFF will appear on the display. The function will be
off and the RPT icon will turn off. Then the display returns to its default.
5/RDM: Pressing the RDM button activates shuffle the shuffle feature. RDM icon on the display indicates
that this feature is on. To cancel SHUFFLE TRACKS or SHUFFLE ALBUMS, press the RDM button again
to reach SHUFFLE OFF.
6/OK: Press the OK button when on a menu to confirm the selection.
To remove the iPod USB cable connector, simply pull the device out of the USB port. The Radio will return
to the previous mode/source.

TROUBLESHOOTING

The following error messages may appear while playing a CD, MP3 disc/USB, iPod:
NO CD:
NO PLAYABLE DISC:
NO MUSIC FILES:
DEVICE NOT SUPPORTED:
CD Media Note:
Sound quality, skipping, difficulty in finding tracks, and/or difficulty in loading or ejecting a CD-R
may be affected by a CD-R's quality, the method of recording, the quality of the music that has
been recorded or the way the CD-R has been handled. If these problems occur, try playing a CD
you know is good to see if the error corrects itself. If an error occurs repeatedly or if an error
cannot be corrected, contact your dealer. If the Radio displays an error message, write it down and
provide it to your dealer when reporting the problem.
USB Media Note:
Not all USB memories can be played. It will depend on the formatting and size of the USB memory.
No CD has been loaded in the player.
No playable files on media – Change media
No playable files on media – Include music files to media
iPod or USB device connected not supported by receiver – Disconnect
iPod or USB device. On iPod case, make sure the firmware is the latest.
Contact Apple for details on firmware upgrades to your iPod.
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

28315190 green display28315192 red display

Table of Contents