Turning The Receiver On; One-Hour Timer; Adjusting The Volume; Displays - Delphi 28315188 Amber Display Owner's Manual

Commercial vehicle systems radio ready receiver with bluetooth cd/mp3/usb/ipod/aux/bluetooth/receiver
Table of Contents

Advertisement

Turning the Receiver On

With the ignition on, the receiver can be turned on and off by pressing the

One-Hour Timer

With the ignition off, pressing the
timer. The receiver will turn off after one hour or by pressing the

Adjusting the Volume

To increase volume, rotate the
counterclockwise.

Displays

The receiver will display the time of day when it is off. Pressing the "i Title/Menu" button when the receiver is
on allows you to toggle between displays (i.e., information on the current song playing) depending upon the
mode you are in.

Radio Mode Displays

When you are using the Radio pressing the "i Title/Menu" button will have no effect.

CD Mode Displays

When you are using the CD player, press the "i Title/Menu" button to toggle between different display views:
1. Artist Name
2. Song Name
3. Album Name
CD information, including disc and track title, is shown when a track is starts to play. If there is more
information than can appear on the display at one time, the display will advance every 2 seconds until
all of the information has appeared.
NOTE: When an audio CD is inserted into the CD player, the receiver will display CD READING until the first
track is played. Then the track number, time elapsed and CD will appear.
If the RPT button is pressed, the Radio will display the RPT icon. If it is pressed again, the display will
delete the RPT icon.
If the RDM button is pressed, the Radio will display the RDM icon. If it is pressed again, the display
will delete the RDM icon.
If the Preset 2/PAUSE/PLAY button is pressed, the Radio will display PAUSE. If pressed again, it will
go back to the previous display and continue playing the CD.

MP3/USB/iPod Mode Displays

When you are playing MP3 or WMA files, press the "i Title/Menu" button to toggle between different displays
views:
1. Track Number
2. Artist Name
3. Song Name ("Song Title" for iPod)
4. Album Name
5. Folder/PLST Name (excluding iPod)
Information including track title and artist name is shown when a track is starts to play. If no information is
available then the Radio will show blank fields. If there is more information than can appear on the display at
one time, the display will advance every 2 seconds until all of the information has been displayed.
button will turn on the receiver and activate the receiver's one-hour
/AUDIO knob clockwise.
button.
button.
To decrease volume, rotate the knob
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

28315190 green display28315192 red display

Table of Contents