Adjusting The Receiver Menu Settings; Clock; Set Alarm; Advanced - Delphi 28315188 Amber Display Owner's Manual

Commercial vehicle systems radio ready receiver with bluetooth cd/mp3/usb/ipod/aux/bluetooth/receiver
Table of Contents

Advertisement

AUTO EQ: Rotate the
from 1 to 7.
Options are:
1.
Pop
2.
Rock
3.
Country
4.
News
5.
Jazz
6.
Classical
7.
Manual
To select the desired option, press the

Adjusting the Receiver Menu Settings

To adjust the Clock, Alarm, Advanced (Speakers, Seek Sensitivity & Dimming), Hands free, and USB, press
and hold "i Title/Menu" button until you hear a beep. Rotate the
counterclockwise to cycle through options available, up and down buttons can be used as well until the
desired feature appears on the display.
When reached desired feature press OK button to select option and ESC button will take you back to
previous options or exit menu options.

CLOCK

See "Using the Clock" section for details.

SET ALARM

See "Using the Alarm" section for details.

ADVANCED

Rotate the
/AUDIO knob or press up/down button to select between the following options:
1.
Speakers
2.
Seek Sensitivity (Available only in Tuner mode)
3.
Dimming
SPEAKERS: Rotate the
functionality. When 2-speaker functionality is chosen, only front speakers are used.
SEEK SENSITIVITY: Rotate the
counterclockwise to decrease it. The display will show SEEK SENSITIVITY and the seek level
from -2 to +2. With a sensitivity at +2, the Radio will only stop on high quality stations. Decreasing
the sensitivity will make the Radio stop on more stations.
DIMMING: Rotate the
counterclockwise to decrease the brightness. The display will show DIMMING and the dim level
from 0 to 30.

USB

Press the OK button to select and the Radio will display PLAYLIST MODE. Rotate the
either direction to toggle from ON to OFF.

USING THE RADIO

Finding a Station

BAND/AUTO: Press this button to switch between FM1, FM2, AM and WX.
TUNE: To tune your Radio manually, press the up/down button once to tune to the next higher or lower
station, one frequency at a time.
:
Press the
or
SEEK
reach a tunable station.
/AUDIO knob clockwise and counterclockwise to cycle through auto EQ options
/AUDIO knob again.
/AUDIO knob in either direction to toggle from 2-speaker to 4-speaker
/AUDIO knob clockwise to increase the seek sensitivity and
/AUDIO knob clockwise to increase the brightness of the display and
button once to tune to the next available station. The SEEK mode ends when you
/AUDIO knob clockwise and
/AUDIO knob in
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

28315190 green display28315192 red display

Table of Contents