Table of Contents
Advertisement
18. i Title/Menu
19. USB
VEHICLE DAMAGE WARNINGS
In this manual you will find the following Notices:
In the NOTICE area, you are informed of something that can damage your vehicle. Many times this damage
would not be covered by your warranty and could be costly. The notice will tell you what to do to help avoid
the damage.
NOTE: Other manuals may use NOTICE differently.
OPERATING INSTRUCTIONS
To learn how to get the most from your Delphi receiver, read all of the instructions that follow.
Using the Clock
Your clock can function in a 12-hour or 24-hour mode. The 12-hour mode distinguishes between AM and
PM. The 24-hour mode operates as military time.
Setting the Clock
1. Turn the ignition on.
2. Press and hold the "i Title/Menu" button for more than 2 seconds until the menu appears. This indicates
you are in the menu mode.
3. Press OK button to enter to the clock submenu.
4. Turn the
/AUDIO knob or press the up/down buttons to change to SET TIME. Press the OK button to
enter set mode.
5. Turn the
/AUDIO knob or press the up/down buttons to change between 12-hour or 24-hour format.
Press the OK button to select one.
6. The display changes to clock configuration, causing the hour digits to flash. Rotate the
press the up/down buttons to change the hour. Rotating the knob clockwise or pressing the up button will
increase the hour, rotating counterclockwise or pressing the down button will decrease the hour.
7. Press the OK button causing the minute digits to flash. Rotate the
buttons to change the minutes. Rotating the knob clockwise or pressing the up button will increase the
minutes, rotating counterclockwise or pressing the down button will decrease the minutes.
At any point in the time set process, not pressing a button or rotating the knob within 8 seconds will cancel
time set mode, return the Radio to normal operation and keep whatever setting changes have been made.
Pressing the power or band buttons sets the clock at whatever time you have selected. The clock is
displayed when the ignition is on and the Radio is off. With Radio and ignition off, the display is blank.
Using the Alarm
The Alarm activates the Radio at a set time.
Pressing the CLOCK/ALARM button for more than 2 seconds will display the alarm set time for 3 seconds.
Setting the Alarm
Displays information/Title of current song/Enter menu mode...........................9
USB input for memory devices.................................................................14
/AUDIO knob or
/AUDIO knob or press the up/down
4
Advertisement
Table of Contents
