8-3. Warm up time check
This operation only applies when the engine has been started with the remote
control.
Operation
Press F switch
Press switches until sound is heard.
Release F switch when beep sound is
heard
The remaining time until the engine turns off automatically is indicated by
the number of times the LED light flashes.
LED light color
Green
Red
Press START
switch while LED
light (green) is
flashing (approx.
3 seconds)
Number of flashes
1 time
2 times
3 times
4 times
Communication failure
17
Indication
LED light color:
See table below
Remaining time
0 to 5 minutes
5 to10 minutes
10 to 20 minutes
20 to 30 minutes