8-2. Engine stop operation
.
Operation
Press F switch
Press switches until sound is heard.
Release F switch when beep sound is
heard
Note
On some vehicle models, the engine also stops when the shift lever is pressed.
The controller buzzer will sound if the engine is stopped for reasons other than a
normal engine stop or the pre-set engine warm-up time has elapsed.
Press STOP
switch while LED
light (green) is
flashing (approx.
3 seconds)
15
Indication
LED light color:
Engine start
Green
Engine not started
Radio signal from remote
Red
controller not received.
Operate in reception range.