Page 2
Running in the Start Screen On the Start screen, press [LG Easy Guide] or [LG Troubleshooting] tile to run it. LG Easy Guide and LG Troubleshooting on the Start screen can be used only in the online environment. If the product is not connected to the Internet, use [LG Easy Guide] and [LG...
Page 3
LG Easy Starter may be installed through LG Update Center. From [LG Software] menu, run [LG Easy Guide] or [LG Troubleshooting]. If LG Easy Starter is not installed, refer to [Run, Stand by and Exit Windows Store App] and then run [LG Easy Guide] or [LG Troubleshooting].
Page 4
LG Electronics Inc. is strictly prohibited. The contents of LG Easy Guide are subject to change without prior notice. LG Electronics does not provide warranty for the data loss. In order to minimize damage from data loss, please make backup copies of important data.
Page 5
The illustrated figures in LG Easy Guide may differ in appearance with the actual products. LG Electronics Inc. reserves the right to modify any part of this manual for quality purposes, without prior notice. Unauthorized reproduction or duplication of any part of LG Easy Guide is strictly prohibited.
Page 6
Instruction / Safety Information Open Source License Info. - COPYRIGHT -, BSD Copyright (c) 2012, Texas Instruments Incorporated All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 7
The CMOS backup battery is an expendable part. CAUTION Please visit the LG Electronics Service Center to exchange the CMOS backup battery. The computer may be damaged if an incompatible battery is used.
Instruction / Safety Information Important Safety Precautions Please avoid any undesirable environmental factor that shortens the machine's life span. Use the machine in a safe and stable place. Installation WARNING Do not use the machine in damp places like a laundry room or bathroom.
Page 9
Instruction / Safety Information CAUTION Place the machine in a safe place so that it does not fall. If dropped, the machine could be damaged and even cause an injury. Do not store or use the PC near a magnetic object (i.e. a bag with a magnetic object, a diary, a wallet, a memo board, high- powered speakers, a bracelet, or etc.).
Page 10
Otherwise, the battery may be damaged presenting a risk of fire. Do not throw or disassemble the battery. The resulting impairment may cause an injury, explosion, or fire. Use batteries certified and acknowledged by LG Electronics Inc. Otherwise, an explosion or fire may occur.
Page 11
Instruction / Safety Information Avoid humidity and heat above 60 °C as in cars or saunas. It may explode or cause a fire. Keep the battery out of reach of children or pets. If damaged, it could cause an injury. Keep the battery from being pierced by a sharp object or a chew of your pet.
Page 12
Instruction / Safety Information Using an AC Adapter WARNING Do not bend the power cable for AC adapter too much or get stamped by a sharp object. The wires inside the cable may break and cause electric shock or fire. Do not use loose plugs or damaged power cords.
Page 13
Instruction / Safety Information In the case of strange noise from the cord or plug, disconnect the power cord from the outlet immediately and contact the service center. A fire or electric shock may occur. Use the power supply/adapter provided with the product and never disassemble the product.
Page 14
Instruction / Safety Information If the power/AC adapter or the product is soaked, disconnect the battery, power/AC adapter, and all other lines before contacting the local service center. An electric shock or fire may occur. Ensure that the power jack linked to the AC adapter and product is connected firmly.
Page 15
Instruction / Safety Information Using the PC WARNING Clean the PC with a proper agent and dry it completely before using it again. If the PC is wet while used, an electric shock or fire may occur. When lightning flashes in your area, disconnect the power, modem, LAN and other connections.
Page 16
Instruction / Safety Information If you detect or smell smoke from the PC, stop use immediately and disconnect the power source before contacting your local service center. A fire may occur. Do not play the PC games excessively. Playing a PC game for an extensive time may cause a mental disorder.
Page 17
Instruction / Safety Information CAUTION Do not leave any object such as a pen on the keypad. You might break the LCD by unwittingly shutting it down with a foreign substance remaining on the pad. Do not press or scratch the LCD panel with a sharp object. It may cause impairment.
Page 18
Instruction / Safety Information Do not put your finger or an object in the PC card slots. An injury or electric shock may occur. Install a vaccine program on your PC and do not download illegal programs nor access any corruptive web site such as those pushing pornographic contents.
Page 19
Instruction / Safety Information Prevent children from thrusting their finger into the optical disk drive (CD/DVD/Blu-ray) tray. The finger may be stuck in the tray and injured. To remove an optical disc (CD/DVD/Blu-ray) from the tray, turn off the program accessing the disc and wait until the disc drive light is turned off before pressing the [Eject] button.
Page 20
Instruction / Safety Information Do not put in metal items such as coins, hair pin or other irons or inflammables such as paper or matches. Especially, ensure that children will not do so. A fire or electric shock may occur. If any foreign substance gets in the product, unplug the product and contract the local service center Do not put any heavy object on the power cable and AC adapter,...
Page 21
Instruction / Safety Information CAUTION Please use parts certified by LG Electronics Inc. . Otherwise, a fire or product damage may occur. Consult our service engineer before you use a peripheral device not manufactured by LG Electronics Inc. The product may get damaged.
Page 22
Instruction / Safety Information Carrying the PC CAUTION Before carrying the machine, turn off the power and disconnect all the cables. Otherwise, you may trip over the wire, damaging the PC and getting an injury. During air travel, follow the directions of flight attendants. Using the PC during flight may cause an aircraft accident.
Page 23
We do not refund or replace a product that malfunctions due to the installation or use of an operating system other than the one provided by LG Electronics. Some software applications may not work properly in other operating systems. Such malfunctions are not covered by the...
Page 24
Energy Star Energy Star Energy Star Specifications LG Electronics participates in Energy Star and the energy efficiency of the product complies with the specifications of ENERGY STAR. ENERGY STAR is a set of regulations that encourages manufacturers of electronic devices to create more energy efficient products.
Instruction / Safety Information Product Specifications PC Specifications Display 54.6 cm IPS LCD Intel ® Pentium ® / Celeron ® processor The CPU specifications differ by model type and cannot be replaced by the user. Graphics Intel ® HD Graphics When processing large graphic data like 3D graphics.
Page 27
Instruction / Safety Information Storage Temperature: -10 °C to 40°C Storage Humidity: 10 % RH to 80 % RH Power Consumption Operating Conditions Approx. 35 W The system is running video clips. Standby mode (Idle state) Approx. 10 W When the monitor display is off Power Saving mode 2 W or lower In S3(Suspend)
This LG Easy Guide has been created for the latest Windows update. Please refer to and install the latest Windows update before using the PC. If the latest Windows update does not install, the PC currently in use and the LG Easy Guide information may differ.
Page 30
With the new Windows 8.1 taskbar and title bar, it is easier to use features like app switching, power options, and screen split. LG Easy Starter for Desktop Start To use the Desktop like in previous versions of Windows, LG Electronics provides LG Easy Starter. LG Easy Starter may be installed through LG Update Center.
Page 31
Using Windows 8.1 Apps downloaded and installed from the Store are unique apps for the Windows Live account. If you login with another account, the apps do not appear on the Start screen.
Using Windows 8.1 Start Screen Windows 8.1's new Start screen has tiles to allow you to use apps more easily and check updates, alarms, and information at a glance. User Account: It is possible to use the Change Picture, Lock, and Logout manuals. Power Options: It is possible to use the Hibernation, System Shutdown, and Restart manuals.
Page 33
Using Windows 8.1 Start screen / Desktop screen switching Switching from Desktop screen to Start Screen On the Desktop screen, press [ ] key on the keyboard. Press [Charms] > [ ] button or [ ] button at the left bottom to switch to the Start screen.
Page 34
Using Windows 8.1 Switching from Start Screen to Desktop Press the [Desktop] tile on the Start screen to switch to Desktop.
Page 36
Using Windows 8.1 Using Charm Menu Charms of the new Windows is a menu designed to allow you to easily access functions such as Search, Share, Start, Device and Settings. When you move the mouse pointer from the Start screen or the Desktop screen to the top or bottom-right corner, Charms appears.
Page 37
Using Windows 8.1 Device Menu: Send a file to a TV, a printer, or any other device, or set a connection between the PC and an external display. Setting Menu: Use a menu that includes the Control Panel, Personal Settings, PC Information, Help, System Preferences (network connection, volume, brightness, etc.) and Power (hibernation, restart, and system shutdown).
Page 38
Using Windows 8.1 Running, Standing by and Exiting App Running An app which is not added on the Start screen or Desktop may be run using the following method: Click the [ ] icon on the left bottom on the Start screen.
Page 39
Using Windows 8.1 When the list of all apps appears, select an app to run on the screen. Using Search in the Start screen or Charms, you can run the app. When you press [ ] + [Q] keys, the Search menu is run immediately. Switching to Standby Mode Windows Store apps can switch the app to the standby mode to switch and use the app rapidly.
Page 40
Using Windows 8.1 If you move the mouse pointer to the bottom of the running app, the title bar appears.
Page 41
Using Windows 8.1 When the title bar appears, click the [ ] icon at the top-right to switch to standby mode.
Page 42
Using Windows 8.1 You can switch to standby mode by dragging the app from the top center of the screen to the bottom. Exiting Windows Store apps, unlike the Desktop apps, can be terminated using the following method: If not in use, Windows Store apps are automatically switched to standby mode.
Page 43
Using Windows 8.1 If you move the mouse pointer to the bottom of the running app, the title bar appears.
Page 44
Using Windows 8.1 When the title bar appears, click the [ ] icon at the top-right to close the app.
Page 45
Using Windows 8.1 If you drag the app from the top center of the screen to the bottom, 2 seconds later the app will close as it rotates halfway.
Page 46
Using Windows 8.1 Windows Help and Support Windows Help provides detailed information on how to use Windows easily. On Desktop, you can press the [F1] key to run [Windows Help and Support]. On the Start screen, from [Charms], select [Settings] > [Help] to display the help of the currently running app.
Page 47
Using Windows 8.1 Press the [Settings] > [Help] from the Charms to run the [Windows Help and Support]. Help and Tips Tour Press and run the [Help and Tips] tile on the Start screen to get information on the new functions of Windows.
Page 49
Using Windows 8.1 Using the Store (Installing and Deleting Windows Store Apps) When you use the Windows store, you may install and use a variety of applications easily. To use the store, you must have a Microsoft account. While using a local account, you can create a Windows Live account through [Charms] > [Settings] >...
Page 50
Using Windows 8.1 The basic categories appear on the Store screen.
Page 51
Using Windows 8.1 Right-click the mouse to open the category details. Select an app in a category you want. When the detailed app screen appears, click the [Install] button. If a local account is being used, a login screen appears. Login with a Microsoft account, or press the [Register New Account] button to create an account in accordance with the instructions.
Page 52
Using Windows 8.1 Deleting Apps Select the app you want to delete from the Start Screen by right-clicking on it, then press the [Uninstall] button. When prompted to confirm the deletion, press the [Uninstall] button to delete the app.
Page 53
Using Windows 8.1 Switching and Exiting Running App Windows' new app switching is different from previous versions of Windows. To exit a program on the Start screen, refer to the instructions below. The app on the Start screen does not have a separate Exit button. When you switch to another app, or move to the Start screen, the mode is switched to standby mode.
Page 54
Using Windows 8.1 App switching on the Start ] + [Tab] screen [When you press the [ ] + [Tab] keys, a preview screen of the running app on the Start screen appears on the right side of the screen. [Whenever you press the [ ] key together with the [Tab] key, an app is selected.
Page 55
Using Windows 8.1 Whenever you press the [Alt] key together with the [Tab] key, an app is selected. When you deselect the keys, the selected app becomes active.
Page 56
Using Windows 8.1 Exiting an app on the task Place the cursor at the left top or bottom edge of the switching screen screen on the Start screen or in Desktop. Move up or down the cursor and the running app's preview appears.
Page 57
Using Windows 8.1 Using Screen Split In Windows 8.1, you can work on two tasks by displaying two apps on one screen. On the Start screen, run the app you want.
Page 58
Using Windows 8.1 Move the cursor to the top center of the running app screen.
Page 59
Using Windows 8.1 When you drag the cursor down, the screen is reduced in size.
Page 60
Using Windows 8.1 While moving the smaller app screen to the left or right, a vertical control bar appears.
Page 61
Using Windows 8.1 After placing the app on the left or right side of the screen, release the left mouse button to fix the app to that position.
Page 62
Using Windows 8.1 Click on the empty screen to go to the Start screen.
Page 63
Using Windows 8.1 When you select another app in Desktop or on the Start screen, the app is displayed in the empty half of the screen.
Page 64
Using Windows 8.1 You may change the screen ratio of an app by using the vertical control bar on the screen. When you drag the vertical control bar to the end of the outer edge, the opened app screen disappears.
Page 65
Using Windows 8.1 You can split the screen by also clicking the app icon in the title bar at the bottom-right of the app that is running.
Using Windows 8.1 Setting the PC Windows 8.1 provides an easy-to-use PC settings menu to allow you to setup the PC more intuitively. Run [Charms] on the Desktop or the Start screen.
Page 67
Using Windows 8.1 In the Charms, click [Settings] > [Change PC Settings]. Configure the PC using the Personal and User Settings.
Page 68
Using Windows 8.1 Unlocking Lock Screen If the PC is not used for an extended period of time, it goes into a locked state. When the PC is used again, a lock screen appears and it may be unlocked using the following method: Unlocking Lock Screen Press any key on the lock screen or drag up while pressing the left mouse button.
Page 69
Using Windows 8.1 Shut Down Options In Windows 8.1, you can use the shutdown options (hibernation, restart, system shutdown) through Charms. Using Start Screen Click the [ ] icon on the bottom-right of the Start screen. As shown in the following, the power options appear. Using Charms Select [Settings]in [Charms] in the Desktop or on the Start screen.
Page 70
Using Windows 8.1 When you press the [Power] icon on the [Settings] menu, the power options appear as shown below. [When you press [ ] + [I], the [Settings] menu appears immediately. Using the Start button Press the Start button ( ) on the bottom left corner of the Desktop by using the right mouse button and then the pop-up window appears.
Page 71
Using Windows 8.1 Select [Exit and Logout] and then [System Shutdown] as shown in the following figure.
Using the PC Using the PC Power Connection To supply power to the PC, use the AC adapters as follows. The power cable and the AC adaptor type may differ per model type and country and there is no difference in functionality. Power Connection The AC adapter can be used from 100 V to 240 V.
Page 73
Do not leave a liquid container on the PC. The system may be short-circuited and damaged. WARNING Please use an AC adapter certified by LG Electronics . Otherwise, an explosion or fire may occur. It may cause a problem in battery charging or system operation.
Page 74
Using the PC Operation Status Lamps Power Lamp: On (red): The system is turned off. On(white): The system is turned on. Blinking (white): When the system is in the sleep mode Off: The AC adapter is not connected. Do not turn off the power forcibly while the power lamp is on or blinking. Otherwise, the disk or its data may get damaged.
Page 75
Using the PC Keyboard The keyboard allows the user to input data or give commands. The keyboard may differ depending on your country. CAUTION Spilling a watery substance like coffee or juice on the keyboard may cause a fault, malfunction, or electric shock. The keys may not work properly when you use several keys at the same time while playing a PC game.
Page 76
Using the PC Shortcut Keys To change the input mode temporarily, you can press the Shift key together with the letter you want to enter. By doing so, you can enter an uppercase letter when the Caps Lock key is not pressed and a lowercase letter when the Caps Lock key is pressed.
Page 77
Using the PC Connecting an External Digital Device Connecting a digital camera, camcorder, cell phone, Smartphone or other digital devices to the USB port, allows you to transfer data or use other additional features. Please refer to the manual of the manufacturer of the digital device for detailed information about its use.
Page 78
Using the PC When the [Autorun] window appears, select [Open Device to View Folder]. Execute the operation you need when the files and data of the external digital device appear.
Page 79
Using the PC Bluetooth Bluetooth allows the user to access wirelessly various devices such as camera, cell phone, headset, printer, and GPS receiver that support Bluetooth . It can also establish a network and exchange data with other bluetooth -enabled PC or smartphone. The Bluetooth device is optional, and it may not be available in some models.
Page 80
Using the PC In the Charms, click [Settings] > [Change PC Settings].
Page 81
Using the PC On the [PC Settings] screen, as shown below, click [PC and Device] > [Bluetooth]. When [Bluetooth] appears, search other connectible devices.
Page 82
Using the PC When a device is found, click the device to connect.
Page 83
Using the PC When the passwords are matched, click [Yes] to complete the connection.
Page 84
Using the PC LAN is the network environment that users can connect to by using a cable to connect to their internet providers or the company's network. Using Wired LAN LAN is installed with an automatic IP (DHCP) as default value. Please refer to the following instructions to find out more about setting up an automatic IP (DHCP) or manual IP.
Page 85
Using the PC In the Charms, click [Settings] > [Control Panel] > [View By] > [Small Icon] > [Network and Sharing Center].
Page 86
Using the PC Click [Change Adapter Settings].
Page 87
Using the PC Right-click [Ethernet] and select [Properties].
Page 88
Using the PC Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].
Page 89
Using the PC If you want to use an automatic IP(DHCP), select [Obtain an IP Address Automatically]. If you want to use a manual IP, select [Use Following IP Address] to enter the address. Please ask the network administrator about obtaining a manual IP. Press [OK] to complete the network setup.
Page 90
Using the PC Wireless Network The wireless network (Wireless LAN) is the network environment that connects a PC with the internet provider or company network through an Access Point (wireless or regular router). Wireless network is optional, and so it may not be installed in some models. Using the Wireless Network If an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless network can easily be accessed.
Page 91
Using the PC Near available Access Point(wireless network) is automatically searched.
Page 92
Using the PC Select the Access Point (wireless network) you want to use and click [Connect] to connect to the Access Point. If a password is set for the wireless network, the Enter Password window appears. When the connection is established, [Connected] is displayed in the connected Access Point(wireless network).
Page 93
Using the PC Using a Wireless or Regular Router A wireless / regular router connects several PCs and mobile devices etc. to one internet line and enables the use of internet and the network. A wireless / regular router has to be bought separately. Refer to the manual provided by the manufacturer for instructions.
Page 94
Using the PC Multi-card slot Checking Available Memory Card This model supports MMC and SD memory cards. SD , SDHC , SDXC , and MMC cards are mobile storage devices, widely used in many digital products these days. To use a mini SD, micro SD or MMC mobile card, mount it on the dedicated adapter and insert the adapter into the multi-card slot in the PC.
Page 95
Using the PC When the memory card is formatted, the data stored in the memory card will be deleted. Check whether there are important data before formatting the memory stick. To format a memory card, right-click the memory card drive and select Format. When Format window appears, click Start to continue.
Page 96
Using the PC To safely removing a memory card: The figures herein may differ by language selection and is subject to change for performance improvements without prior notice. Click the [Safely Remove Hardware and other Media] icon on the right side of the taskbar.
Page 97
Using Software Using Software LG Easy Starter LG Easy Starter provides classic functions, like the Start menu of previous Windows, in Desktop Mode to allow you to easily use the desktop. Windows Style apps do not appear in LG Easy Starter.
Page 98
Using Software Click the [All Lists] menu to access the update and install lists. Select LG Easy Starter and click [Install] to install. When the installation is completed, LG Easy Starter [ ] tile and icon are created on the Start screen and Desktop.
Page 99
Recently Used Programs: A list of recently used desktop programs is displayed. c Frequently Used Programs: Register and use frequently used desktop programs. d LG Software: Possible to run software provided by LG Electronics Inc. e Shortcut: Shortcuts to Computer, Control Panel, Devices and Printers, and Library menus.
Page 100
Using Software LG Network Share LG Network Share is software that allows you to configure and use Virtual AP and File Sharing. LG Network ShareFor more details about how to use , refer to the corresponding help. The figures herein are subject to change without prior notice.
Page 101
Using Software b Virtual AP setup menu: You can modify the SSID, password, and the download folder of the virtual AP. c Connected Device Information Tile : It provides information on all connected devices to the AP. Click to send a file and display the status of the transfer.
Page 102
LG Care Center LG Care Center allows you to easily diagnose/troubleshoot and optimize the system. LG Care CenterFor more details about how to use , refer to the corresponding help. Basic and selective diagnostics functions require network support or LG Update Center support.
Page 103
Using Software e Diagnostics History: Retrieves and displays past diagnostics results in full detail. f PC Optimization: Clean up the files and registry and improve system performance. g Diagnostics Reservation: The user schedules when to perform the Basic Diagnostics by setting the Diagnostics Cycle.
Page 104
Using Software LG Control Center LG Control Center is software that help you to change PC Settings, Power Settings, Windows Security Settings, etc. as well as viewing system information. LG Control CenterFor more details about how to use , refer to the corresponding help.
Page 105
Using Software d Power Management Option : Sets up the power management option. e Windows Security Settings : Sets User Account Control settings and Firewall settings. f System Information : Displays the PC OS in use, processor information and other system information.
Page 106
Using Software LG Update Center LG Update Center allows you to install various PC drivers, applications and Windows patches easily. The illustrated images are subject to change without prior notice. It may not work properly depending on user preferences (security tools, etc.) and the network status.
Page 107
Using Software You can use LG Update Center to install deleted drivers or latest drivers easily and quickly. Use LG Update Center to keep your system current and optimized.
Page 108
Using Software SmartShare SmartShare uses DLNA to allow you to search and enjoy videos, photos, music and other media contents using a device connected to a local network. Starting SmartShare Click the [ ] tile from the Start screen to run SmartShare . On SmartShare screen, select one from MOVIE, PHOTO or MUSIC.
Page 109
Using Software SmartShare Tour Preferences button Edits the options for SmartShare . Help button Displays the Help menu. Minimize, Maximize, Exit buttons Allows you to minimize or maximize the window or exit the program. Content type area Allows you to select a group by pushing a button among MOVIE, PHOTO, and MUSIC.
Page 110
Refreshes the contents or the list of DMR devices. When LG PC's SmartShare function is interlocked with LG TV, the function runs most smoothly with TV based on Netcast 3.0 and may not run smoothly with the older version of TV.
Page 111
Restoring the System Using LG Recovery Center If the system has an error, you can use LG Recovery Center to use Windows 8.1 recovery function to recover or restore the system to its initial pre-purchase state. LG Recovery Center uses the recovery function of Windows.
Page 112
Restoring the System PC Recovery: Recovers the PC without losing any personal files. CAUTION PC settings are reset to default and any user-installed software will be deleted. PC Initialization: Removes all items from the system and restores the system to its initial pre-purchase state.
Page 113
Restoring the System c Once the storage device is ready, click [Finish] to create a recovery drive. CAUTION Select [Remove the Recovery Partition] while creating a recovery drive to remove the recovery partition in the PC. Once the recovery partition is removed, you cannot use the recovery function of the PC.
Page 115
Recovering from a Boot Failure If booting is impossible due to a serious error with the system, you can recover the system using LG Recovery Center RE. CAUTION If you have deleted the restoration data in the protected area of the hard disk, the restore function may not work.
Page 116
Restoring the System When the following screen appears, select the [Agree] button and then click the [Next] button. For recovery, the AC adapter must be connected. Connect the system power and then recover the system.
Page 117
If it is impossible to recover by using [F11], you can recover the system through a recovery drive. To recover by using a recovery drive, you must have the recovery drive made through LG Recovery Center [Create Recovery Drive]. Connect the recovery drive to the USB port of the PC.
Page 118
Setup and Upgrade Setup and Upgrade Information on Windows 8.1 Update If the Windows 8.1 update does not install automatically or the system is not up-to-date, you can manually install the update by following these steps. Install the Windows 8.1 update to use the newly expanded features. On a Windows 8.1 update-installed PC, the Exit and Search buttons will appear in the upper-right corner of the Start screen.
Page 119
Setup and Upgrade In Charms, click [Setup] > [Change PC Changes]> [Update and Recovery] manual.
Page 120
Setup and Upgrade As shown in the figure, when the Windows update window appears, click [Check now].
Page 121
Setup and Upgrade As shown in the figure, when a message that new updates are available appears, click [View Details].
Page 122
Setup and Upgrade In View Details, click [Select all important updates] and the Install button to proceed.
Page 123
Setup and Upgrade Once the new updates have been installed, click [Restart] when the following screen appears to complete installation.
Select [Critical Updates] or [All Lists] to install the driver. For more information on LG Update Center, refer to [Help]. You can use LG Update Center to install deleted drivers or latest drivers easily and quickly. For the system optimization, use LG Update Center to keep up-to-date.
Page 125
Setup and Upgrade How to download LG Update Center You can download LG Update Center from LG Electronics Cyber Service Center (www.lg. com).
Page 126
Setup and Upgrade Starting System Setup System setup means storing the hardware configuration information of the PC in the flash memory. Through system setup, the PC retrieves various information including current date and time, memory capacity, and hard disk capacity and type. You setup the system when you set passwords, change the boot order, and add new peripheral devices to the machine.
Page 127
Setup and Upgrade Reboot the system and press [F2].
Page 128
Setup and Upgrade In a few moments, the system setup screen appears. Keys Used in System Setup Keys Function Enter Selects the current item. To deselect the current item or to move to the previous screen. (Arrow Moves the cursor up, down, left, and right. keys) Stores new settings or ends the system setup.
Setup and Upgrade Setting the Password This process is to set a password so that other people cannot use the PC or change the settings. The user can set a password while booting the system or setting up the system. CAUTION Without the registered password, access to the system will be denied.
Page 130
Setup and Upgrade When the following screen appears, click [Enter] in the [Set Supervisor Password] menu.
Page 131
Setup and Upgrade When the following message appears, enter the password and click [OK]. The password must not exceed 8 total characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both.
Page 132
Setup and Upgrade When the following message appears, click [OK]. To save the changes in system setup, press [F10].
Page 133
Setup and Upgrade When the following message appears, click [YES]. The PC will restart. With Supervisor Password, you are authorized to set all items in the System Setup and to set Password on boot. In case other people also use the notebook PC, it is recommended to set the Set User Password.
Page 134
Setup and Upgrade After opening the system setup screen, click the [Security] button.
Page 135
Setup and Upgrade When the following screen appears, click [Enter] in the [Set User Password] menu.
Page 136
Setup and Upgrade When the following message appears, enter the password and click [OK]. The password must not exceed 8 total characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both.
Page 137
Setup and Upgrade When the following message appears, click [OK]. To save the changes in system setup, press [F10].
Page 138
Setup and Upgrade When the following message appears, click [YES]. The PC will restart. [User Password] allows limited access to the items in the System Setup compared to the [Supervisor Password] item. Password on boot [Password on boot] menu protects the system by requesting [Set Supervisor Password] or [Set User Password] during boot up.
Page 139
Setup and Upgrade After opening the system setup screen, click the [Security] button.
Page 140
Setup and Upgrade When the following screen appears, set [Set Supervisor Password] only or both [Set Supervisor Password] and [Set User Password].
Page 141
Setup and Upgrade Click the [Off] button in the [Password on boot] menu as shown in the following figure. The button changes to [On] and the [Password on boot] setting is completed. Set HDD Password / Set SSD Password HDD / SSD Password is to set a password in the HDD and SSD separately from the Supervisor Password.
Page 142
Setup and Upgrade After opening the system setup screen, click the [Security] button. When the [Security] menu appears, click the [HDD Security Status] button.
Page 143
Setup and Upgrade When the following screen appears, click [Enter] in the [Set HDD Password] or [Set SSD Password] menu.
Page 144
Setup and Upgrade When the following message appears, enter the password and click [OK]. The password must not exceed 8 total characters consisting of letters (A - Z), numbers (0 - 9), or a combination of both.
Page 145
Setup and Upgrade When the following message appears, click [OK]. To save the changes in system setup, press [F10].
Page 146
Setup and Upgrade When the following message appears, click [YES]. The PC will restart. CAUTION HDD PasswordWithout the password, it is impossible to recover the HDD. The replacement of HDD due to a forgotten HDD Password is not covered by warranty.
Page 147
Setup and Upgrade Changing or Deleting the Password You can delete or change the password only after inputting the current password. Changing the Password Execute System Setup, enter the password, and press [Enter]. Change the password the same way as setting one.
Page 148
Setup and Upgrade Deleting the Password Execute System Setup, enter the password, and press the [Security] button.
Page 149
Setup and Upgrade When the following screen appears, click [Enter] in the [Set Supervisor Password] menu.
Page 150
Setup and Upgrade When the following message appears, enter the current password in the [Enter Current Password] field.
Page 151
Setup and Upgrade Press [Enter] in [Enter New Password] and [Confirm New Password].
Page 152
Setup and Upgrade When the following message appears, click [OK]. To save the changes in system setup, press [F10].
Page 153
Setup and Upgrade When the following message appears, click [YES]. The PC will restart.
Page 154
Setup and Upgrade Deleting the Password (Set HDD Password / Set SSD Password) Execute System Setup, enter the password, and press the [Security] button. When the [Security] menu appears, click the [HDD Security Status] button.
Page 155
Setup and Upgrade When the following screen appears, click [Enter] in the [Set HDD Password] or [Set SSD Password] menu.
Page 156
Setup and Upgrade When the following message appears, enter the current password in the [Enter Current Password] field.
Page 157
Setup and Upgrade Press [Enter] in [Enter New Password] and [Confirm New Password].
Page 158
Setup and Upgrade When the following message appears, click [OK]. To save the changes in system setup, press [F10].
Page 159
Setup and Upgrade When the following message appears, click [YES]. The PC will restart.
Page 160
Setup and Upgrade Restoring the Factory Default Settings If you have changed the system setup by mistake, you can restore the default settings. After opening the system setup screen, click the [Save & Exit] button.
Page 161
Setup and Upgrade When the [Exit] menu appears, click [Load Setup defaults].
Page 162
Setup and Upgrade When the following message appears, click [Yes]. The settings will be reset to the factory default. To save the changes in the system setup, press [F10].
Page 163
Setup and Upgrade When the following message appears, click [YES]. The PC will restart. You may press [F9] to use the [Load Setup defaults] menu.
Page 164
Setup and Upgrade Changing Boot Order The user can change the boot order according to his or her needs, or select a boot device The model in the example can differ from actual models and is subject to change for performance improvements, without prior notice.
Page 165
Setup and Upgrade When the system setup screen appears, click the [Boot] button.
Page 166
Setup and Upgrade Drag the icon of the device to change the booting order in the [Edit Boot Order] menu to change the booting order.
Page 167
Setup and Upgrade When the following message appears, click [YES]. The changes are saved and the system reboots.
Page 168
Setup and Upgrade Selecting a Boot Device to Use Reboot the system and press [F10].
Page 169
Setup and Upgrade When the Select Boot Device screen appears. select the device. Boots using the selected device.
Page 170
You may need to replace the PC memory for better performance. For memory replacement, we recommend that you receive a paid service from a service center certified by LG Electronics. LG Electronics disclaims any responsibility for damage resulting from uncertified service or arbitrary disassembly.
Page 171
Setup and Upgrade CAUTION It is recommended you visit an LG Electronics Service Center for memory replacement. The memory replacement is not covered in the warranty and may incur service charges. To upgrade the machine, turn off the system and disconnect the power cord and the battery.
Page 172
Setup and Upgrade As shown in the following picture, after loosening the screws fixed on the memory cover, remove the memory cover.
Page 173
Setup and Upgrade Insert the replacement memory into the memory slot in the direction of the arrow.
Page 174
Setup and Upgrade Push the memory in the direction of the arrow until you hear a "click" sound.
Page 175
Check the memory capacity during the second boot. If the memory capacity is not correct, reinstall the memory card. CAUTION Use only the main memory module for replacement manufactured by LG. Using a memory module other than what is recommended may cause malfunctioning of the product.
Page 176
FAQ Content Information on Windows 8.1 Update If the Windows 8.1 update does not install automatically or the system is not up-to-date, you can manually install the update by following these steps. Install the Windows 8.1 update to use the newly expanded features. On a Windows 8.1 update-installed PC, the Exit and Search buttons will appear in the upper-right corner of the Start screen.
Page 177
In Charms, click [Setup] > [Change PC Changes]> [Update and Recovery] manual.
Page 178
As shown in the figure, when the Windows update window appears, click [Check now].
Page 179
As shown in the figure, when a message that new updates are available appears, click [View Details].
Page 180
In View Details, click [Select all important updates] and the Install button to proceed.
Page 181
Once the new updates have been installed, click [Restart] when the following screen appears to complete installation.
Page 182
Using LG Recovery Center If the system has an error, you can use LG Recovery Center to use Windows 8.1 recovery function to recover or restore the system to its initial pre-purchase state. LG Recovery Center uses the recovery function of Windows.
Page 183
PC Initialization: Removes all items from the system and restores the system to its initial pre-purchase state. CAUTION All data is lost during the initialization, so you must backup all critical data in advance. It may take about 5 hours or longer depending on the system conditions. Creating Recovery Drive: You can create a recovery drive in Windows as a precaution against a system failure that prevents you from entering the operating system, or any other severe system issues.
Page 184
c Once the storage device is ready, click [Finish] to create a recovery drive. CAUTION Select [Remove the Recovery Partition] while creating a recovery drive to remove the recovery partition in the PC. Once the recovery partition is removed, you cannot use the recovery function of the PC.
Page 186
Using a Wireless or Regular Router A wireless / regular router connects several PCs and mobile devices etc. to one internet line and enables the use of internet and the network. A wireless / regular router has to be bought separately. Refer to the manual provided by the manufacturer for instructions.
Page 187
Wireless Network The wireless network (Wireless LAN) is the network environment that connects a PC with the internet provider or company network through an Access Point (wireless or regular router). Using the Wireless Network If an Access Point (wired or wireless router) is in the vicinity of the PC, the wireless network can easily be accessed.
Page 188
Near available Access Point(wireless network) is automatically searched.
Page 189
Select the Access Point (wireless network) you want to use and click [Connect] to connect to the Access Point. If a password is set for the wireless network, the Enter Password window appears. When the connection is established, [Connected] is displayed in the connected Access Point(wireless network).
Page 190
LAN is the network environment that users can connect to by using a cable to connect to their internet providers or the company's network. Using Wired LAN LAN is installed with an automatic IP (DHCP) as default value. Please refer to the following instructions to find out more about setting up an automatic IP (DHCP) or manual IP.
Page 191
In the Charms, click [Settings] > [Control Panel] > [View By] > [Small Icon] > [Network and Sharing Center].
Page 193
Right-click [Ethernet] and select [Properties].
Page 194
Select [Internet Protocol Version 4 (TCP/IPv4)] and click [Properties].
Page 195
If you want to use an automatic IP(DHCP), select [Obtain an IP Address Automatically]. If you want to use a manual IP, select [Use Following IP Address] to enter the address. Please ask the network administrator about obtaining a manual IP. Press [OK] to complete the network setup.