Table of Contents
Advertisement
ENTRANCE STATION
Calling with the 10 key module
■ Searching for a unit by entering the unit #
1
In standby mode, enter the numbers using [0] to
[9] on the 10-key to display the target unit # and
resident name.
101
SMITH
2
When the target unit # and resident name is
displayed, press
.
The call indicator will light up and you will hear
a call tone.
*
Audio guidance will be heard depending on
the settings.
*
If there is no relevant unit #, "NO ENTRY" is displayed.
NO ENTRY
*
When the residential/tenant station that has been called is in
use, the IN USE LED lights up to indicate that the residential/
tenant station cannot be called.
(In an expanded system, there may be a case that a residential/
tenant station cannot be called even if the IN USE LED is off.)
When the call is answered
Communication starts and the talk indicator
lights up.
*
Audio guidance will be heard depending on the settings.
When the door is released
The door release indicator lights up.
*
Audio guidance will be heard depending on the settings.
1
2
3
B
E
4
5
6
H
K
N
7
8
9
U
0
- 10 -
■ Searching for a unit by entering resident
name
1
In standby mode, press
2
When "ENTER A LETTER" is displayed, enter a
letter using the 10-key to display the target unit #
and resident name.
The number and resident name for the unit whose initial
corresponds to the entered letter will be displayed.
(e.g.) Enter "S".
101
SMITH
*
Pressing
or
searches for the next unit # and resident
name.
*
Depending on the settings, only the resident name may be
displayed.
*
When the unit # is set to not be displayed, a letter can be
entered without pressing
*
If there is no relevant resident name, "NO ENTRY" is
displayed.
NO ENTRY:
NOTES:
Pressing
or
for approximately 2 seconds will display
•
resident names in succession.
If both unit # 111 and 1111 exist, the resident name for unit
•
111 will be displayed when 1, 1, 1 is entered, and the
resident name for unit 1111 will be displayed if 1 is entered
one more time.
Stations can be set to display in order by unit #. (The order
•
starts with the lowest digit from 0 to 9 and then the order
goes by letter.) In cases where unit # such as A101, A201,
A901, A1001, and B101 exist, the order starts with the
lowest digit and goes in the order A101, A201, A901, B101,
A1001.
1
2
3
B
E
4
5
6
10-key
H
K
N
7
8
9
U
0
on the 10-key.
.
S
Hide quick links:
Advertisement
Table of Contents
