Preparing To Print; Loading Rfid Labels - Lexmark T640rn User Manual

Preparing to print

Loading RFID labels

To load labels:
Note: Do not remove a tray when a job is printing or when the operator panel indicator light is blinking. Doing so may
cause a jam.
1
Remove the tray from the printer, and place it on a flat, level surface.
2
Squeeze the side guard tab, and slide the guide to the outer edge of the tray.
3
Flex the label sheets back and forth to loosen them, and then fan them. Do not fold or crease the label sheets.
Straighten the edges on a level surface.
4
Place the label sheets with the print side facing down and the labels positioned at the back of the tray.
5
Squeeze the rear guide tab, and slide the guide to the correct position for the size label sheets you are loading.
6
Insert the tray into the printer.
The increased thickness of RFID labels reduces the input and output bin capacity. Test your software program to ensure
that you understand the reduced input and output bin capabilities. For information on label construction, see the Card
Stock and Label Guide on the Lexmark Web site at www.lexmark.com/publications.
Lexmark Confidential until announced
Preparing to print
6