Table of Contents
Advertisement
RFID service messages
Message
902.81 Service engine software error
985.01 Unable to communicate with interface card
985.02 Unable to communicate with radio
985.03 Radio fails internal self test
985.04 Antenna appears disconnected
985.05 Radio firmware flash upgrade failed
Lexmark Confidential until announced
Action
1
Turn the printer off.
2
Unplug the power cord.
3
Check all cable connections.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer on.
6
If the service message recurs, call for service, and
report the message number and a description of the
problem.
Understanding RFID printer messages
12
Advertisement
Table of Contents
