Populating The Corporate Directory - Avaya 1010 User Manual

Populating the Corporate Directory

Users can place calls from the directory by selecting a number to dial from a list of stored
numbers. The corporate directory is H.350 compliant and can store up to 1000 entries in
both an alphabetical and hierarchical format. All users can manage entries in the local
directory. Only administrators can manage entries in the corporate directory.
You can populate the corporate directory by configuring Auto Discovery preferences or
Lightweight Directory Access Protocol (LDAP) preferences in Administrator Preferences :
Directory. You can enable only one of these methods. The system automatically disables
the other method to prevent duplicate entries from appearing in the corporate directory. The
status of these methods, either enabled or disabled, appears on the Administrator
Preferences : Directory screen. The connection status of the LDAP installation also
appears on this page and on the System Information page. The values that can appear for
the connection status include the following:
LDAP Connection Status
Unregistered
Registered
Unreachable
Unauthorized
Invalid Syntax
Failed
Avaya 1010/1020 User Guide
Description
LDAP preferences are not configured.
LDAP preferences are configured. The last attempt by the Avaya system to
contact the LDAP server and receive data was successful.
LDAP preferences are configured, but the LDAP hostname is invalid or the
service does not exist.
LDAP preferences are configured, but the username or password is invalid.
LDAP preferences are configured, but the base Distinguished Name (DN) is
invalid.
LDAP preferences are configured, but an unexpected failure occurred.
49