Table of Contents
Advertisement
Telephone
The C120™ has the ability to produce an
audible indicator heard through the headset
when the telephone rings. The following
step is necessary if telephone ring notification
is desired.
First, plug the telephone cord coming from
the wall into the jack on the rear of the base
labeled "LINE." A phone cord can then be
connected from the jack labeled "PHONE"
on the rear of the base to a telephone. This
process is illustrated in Figure 12.
The C120™ allows you to use the same
phone wall outlet for both your phone and
C120™ TV Listener.
SETTING UP THE C120™ HEADSET
Installing the Batteries
The supplied battery is a NiNH battery.
Install the supplied Rechargeable Battery
into the bottom of the headset. Once you
place the headset into the base, as illustrated
in Fig. 13, it begins to charge the battery.
The main Headset Battery Charger and both
backup batter chargers on the base have a
corresponding LED light on the front panel
that will light up when a dock is being used.
Backup batteries can be bought and placed
in the additional charging docks located on
the base. The charging docks are labeled
in
.
Figure 14
Having these extra batteries to switch in and
out will enable longer product usage without
having to wait for a battery to charge. When
the product is not in use, return the headset
to the base to recharge the battery.
TM
C120
OPERATION
FIG. 12
BACKUP BATTERY CHARGERS
HEADSET CHARGER
FIG. 13
FIG. 14
Note: The battery is not
charged when it comes out of
the box. It must be charged
overnight before usage.
9
Advertisement
Table of Contents
