Related Manuals for Clarity C120
Summary of Contents for Clarity C120
- Page 1 C120™ Wireless TV Amplifier...
- Page 2 C120 The C120 is perfect for those with a moderate-to-severe hearing loss who have difficulty understanding TV dialog. The C120 allows the end-user to hear the TV clearly and comfortably without disturbing others. Sound and Comfort: Together Again...
- Page 3 C120 Features Listen to the TV in wireless Stereo Surround Sound! Featuring Clarity Power with amplification up to 50dB at 124 dBSPL Telephone Call Notification lets the user know when the phone is ringing. The Public IR feature allows the headset to be used with public IR systems at places like theaters and museums.
- Page 4 C120 Features Clarity Power: 50dB of Amplification Adjustable Tone and Balance Multi Headset Capable Range: 38 ft. (Line of Sight) Automatic Power On/Off (Headset) High Fidelity Surround Sound Public IR Compatible Two (2) Rechargeable Batteries: 4 hour usage/charge time Ability to charge 3 at a time...
- Page 5 C120 Parts Checklist...
- Page 6 C120 Installation Transmitter For the clearest signal, place the base at the same height of the viewing level. Do not place the transmitter (base) in the direct sunlight. Sunlight and fluorescent lights can cause interference. The headset must be used in the same room as the base and no more than 38 feet away.
- Page 7 C120 Installation Transmitter Connect the Power 1. Connect the AC Adapter into the DC12V port located on the back of the base. 2. Plug the AC Adapter into a wall outlet.
- Page 8 C120 Installation Transmitter Selecting the Appropriate Cord 1. Check the TV or other device for the type of Audio Outputs available. 2. Depending on the outputs available, select the appropriate cord included with the C120.
- Page 9 A. If the device has both Red (Right) and White (Left) RCA Outputs: 1. Use the provided RCA Stereo Cable pictured above and connect to both the device outputs and the C120 base. 2. Set the “Stereo/Mono” switch on base to “Stereo.”...
- Page 10 1. Use the provided RCA – 3.5mm Stereo Cable pictured above and connect to both the device output and the RCA ports on the C120 base. 2. Set the “Stereo/Mono” switch on base to “Mono.” 3. This option is for use with all other types of audio...
- Page 11 C. If the device has no Output port: 1. Use the provided Microphone pictured above. 2. Connect it to the back of the C120 base in the Mic port. 3. Place the Microphone close to the speaker of the TV or other device.
- Page 12 C120 Installation Telephone Ring Notification The C120 has the ability to produce an audible tone heard through the headset when the telephone rings. First, Plug the telephone cord coming from the wall into the “Line” port at back of base.
- Page 13 C120 Operation Batteries Install the rechargeable battery in bottom of the headset and place into base The battery takes four (4) hours to fully charge • Backup batteries may be bought placed in the additional charging dock • At full volume, the battery will last...
- Page 14 C120 Operation Headset When the headset arms are extended, the unit automatically powers ON. The C120 will turn OFF, if there is no audio signal detected. Note: The infrared sensor that communicates with the transmitter base is on the front of the headset and should remain within sight of the C120 base.
- Page 15 C120 Operation Headset On top of the headset there is a “Home and Away” Switch 1. Switch to “Home” to listen to the television with the included base 2. Switch to “Away” to use with public infrared systems.
- Page 16 C120 Operation Headset The Volume Control is located on the top of the headset 1. To increase the volume turn the wheel in toward the “+” 2. To decrease the volume turn the wheel toward the “-”...
- Page 17 C120 Operation Headset The tone control is located on the back of the headset There are two controls: 1. For right earphone 2. For the left earphone The screwdriver will be needed to adjust this control...
-
Page 18: Technical Specifications
Dimensions: 7 1/16”L x 3 5/8”W x 1 1/8”H (17.9cm x 9.2cm x 2.8xm) Weight: 5.2 oz (147g) AC Adapter: 100-240V, 50/60 Hz, 0.15 Amps Charging Docks: Charges one (1) C120 headset and two (2) additional Batteries in the auxiliary docks. - Page 19 Amplified dB Level: 50dB, 124 dBSPL Battery Type: Nickel Metal Hydride (NiMH0, Rechargeable, weight is 0.3 oz) Battery Life: Four (4) hour usage time, four (4) hour charge time, lasts 500 charges (C120 comes with 2 batteries, allowing eight (8) hours of usage Time)