Table of Contents
Advertisement
TM
C120
OPERATION
CONNECTING THE TRANSMITTER
Power
First, connect the Power Supply into the DC12V
DC1 2 V
jack located on the back of the base. The DC12V
port is illustrated in Fig. 2. Then plug the Power
Supply into a wall outlet.
FIG. 2
Audio
Next, using one of the Audio Cable supplied,
connect the base unit directly to the TV, VCR,
or other equipment output jacks. See different
connection options listed below.
Included in the package, there are two cords to
use for the incoming audio. One will have two
RCA jacks (red and white) on both ends. (Fig.
3) This can be used to connect with devices with
both Right and Left channel RCA jacks (TV's,
VCR's, etc). The other is a cord with two RCA
jacks (red and white) on one end and on the
other is a 3.5mm jack. (Fig. 4) A 3.5mm jack is
the size found on a pair of headphones. This can
be used to connect the C120™ to devices with
3.5mm ports, such as CD players, radios and
other small electronics. See Figures 6-9.
1. Stereo Mode:
(For Highest Sound Quality) This mode should
TV
R
be used if the television (or other audio equip-
W
ment) has two RCA audio jacks (red and white).
STEREO
MONO
See Figures 3 and 4.
FIG. 3
Connect the RCA plugs from the speaker
output of the TV or VCR into both the left
and right RCA jacks on the base.
V C R
Next, select "Stereo" on the
Mono/Stereo switch.
FIG. 4
7
Advertisement
Table of Contents
